Pepperl+Fuchs UC2000-30GM-IUEP-IO-V15
Ultrasonic sensor
- IO-link interface for service and process data
- Programmable via DTM with PACTWARE
- Switch output and analog output
- Selectable sound lobe width
- Synchronization options
- Temperature compensation
- Overview +
- Comments +
The UC2000-30GM-IUEP-IO-V15 is an advanced ultrasonic sensor that provides a detection range of up to 2000 mm. Featuring an integrated output and input processing unit, this sensor is designed for high-performance applications requiring precise, reliable measurements. The IP67-rated housing ensures it remains durable in industrial environments subject to exposure to dust, moisture, and vibrations. It is widely used in industries such as packaging, robotics, and quality control systems, where non-contact distance measurement is critical for operational efficiency.
Datasheet:
| Interface type | IO-Link |
| Protocol | IO-Link V1.0 |
| CSA approval | cCSAus Listed, General Purpose |
| SIO mode support | yes |
| Transducer frequency | approx. 200 kHz |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| Repeat accuracy | 0.1 % of full-scale value |
| Switching frequency | 4 Hz |
| Cycle time | min. 33.6 ms |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| Resolution | current output: evaluation range [mm]/3200 but 0.35 mm voltage output: evaluation range [mm]/4000 but 0.35 mm |
| LED green | solid: Power on flashing: Standby mode or IO link communication |
| Mass | 72 g |
| Deviation of the characteristic curve | 0.2 % of full-scale value |
| LED red | solid red: Error red, flashing: program function, object not detected |
| Load impedance | current output: 300 Ohm voltage output: 1000 Ohm |
| No-load supply current | 60 mA |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA ... 20 mA or voltage output 0 V ... 10 V configurable |
| Input/output type | 1 synchronization connection, bidirectional |
| Degree of protection | IP67 |
| Process data witdh | 16 bit |
| Response delay | minimum : 65 ms factory setting: 125 ms |
| Adjustment range | 120 ... 2000 mm |
| Transfer rate | Acyclical: typical 95 Bit/s |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS 15 ... 30 V voltage output |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Temperature influence | 1.5 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| Dead band | 0 ... 90 mm |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) |
| UL approval | cULus Listed, General Purpose |
| Voltage drop | 2.5 V |
| Ambient temperature | -25 ... 70 ?°C (-13 ... 158 ?°F) |
| Sensing range | 90 ... 2000 mm |
| Standard target plate | 100 mm x 100 mm |
| Power consumption | 1 W |
Buy Pepperl+Fuchs UC2000-30GM-IUEP-IO-V15 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is fast developing company in automation parts. We can help you save time and reject from many other suppliers due to the large variety of offering goods. Our sales are spread all over the world. Due to providing low prices you can save money. A personal manager will attend you at all stages of the deal. We respect your needs and are interested in their total satisfaction.
Comments
No comments yet