Pepperl+Fuchs UC2000-30GM70-2E2R2-K-V15
Ultrasonic sensor
- 2 switch outputs
- Synchronization options
- Temperature compensation
- Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
Item Number:
UC2000-30GM70-2E2R2-K-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Adjustment range | 150 ... 2000 mm |
| Switching hysteresis | 20 mm ( programmable ) |
| Operating voltage | 12 ... 30 V DC (including ripple) |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Operating current | Per 150 mA , short-circuit/overload protected |
| Voltage drop | 3 V |
| UL approval | cULus Listed, General Purpose |
| No-load supply current | 50 mA |
| Response delay | 100 ms |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Transducer frequency | approx. 200 kHz |
| Default setting | 150 ... 2000 mm ( adjustable via potentiometer ) |
| Output type | 2 switch outputs PNP, NO ( NC contact programmable ) |
| Interface type | Infrared |
| Temperature drift | В± 1.5 % of full-scale value |
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
| Mass | 190 g |
| LED green/yellow | yellow: switching state switch output 2 green: Teach-In |
| CSA approval | cCSAus Listed, General Purpose |
| Sensing range | 100 ... 2000 mm |
| Degree of protection | IP65 |
| Potentiometer | Switching output 1 and Switching output 2 adjustable |
| LED yellow | solid Switching state switch output 1 |
| Standard target plate | 100 mm x 100 mm |
| Connection type | Connector M12 x 1 , 5-pin |
| Repeat accuracy | В± 3 mm |
| Construction type | Cylindrical |
| Cable length | 165 cm |
| Switching frequency | 4 Hz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Dead band | 0 ... 100 mm |
| Off-state current | 10 andmicro;A |
Comments
No comments yet