Pepperl+Fuchs UC2000-30GM70S-IE2R2-V15
Ultrasonic sensor

Pepperl+Fuchs UC2000-30GM70S-IE2R2-V15
  • Analog output 4 ... 20 mA
  • 1 switch output
  • Synchronization options
  • Temperature compensation
  • Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
Item Number: UC2000-30GM70S-IE2R2-V15
374.88
-
+
Total price: 374.88
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Load resistor 500 andOmega;
Input/output type1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input
Standard target plate100 mm x 100 mm
Default settingrising ramp ; evaluation limit A1: 150 mm ; evaluation limit A2: 2000 mm
Repeat accuracyВ± 3 mm
Adjustment range150 ... 2000 mm
Switching hysteresis20 mm ( programmable )
Temperature drift В± 1.5 % of full-scale value
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Transducer frequencyapprox. 200 kHz
Output type1 switch output PNP, NO ( NC contact programmable )
Off-state current 10 andmicro;A
Operating voltage20 ... 30 V DC (including ripple)
Default setting150 ... 2000 mm ( adjustable via potentiometer )
UL approvalcULus Listed, General Purpose
Operating current300 mA , short-circuit/overload protected
LED yellowswitching state switch output
Dead band0 ... 100 mm
Connection typeConnector M12 x 1 , 5-pin
Switching frequency 4 Hz
CSA approvalcCSAus Listed, General Purpose
Construction typeCylindrical
No-load supply current 50 mA
Mass170 g
Sensing range100 ... 2000 mm
CCC approvalCCC approval / marking not required for products rated 36 V
LED green/yellowyellow: object in evaluation range
green: Teach-In
Response delay 100 ms
Degree of protectionIP65
Output type1 current output 4 ... 20 mA , ascending/descending programmable
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Voltage drop 3 V
Interface typeInfrared
Potentiometerswitch output adjustable

Comments

No comments yet

Write a comment