Pepperl+Fuchs UC2000-L2-E6-V15 Ultrasonic sensor
Item Number: UC2000-L2-E6-V15
- Sensor head bidirectional and rotatable
- Function indicators visible from all directions
- Quick mounting bracket
- Selectable sound lobe width
- Programmable
- Overview
- Datasheet
- Alternative numbers
- Comments
| CCC approval | CCC approval / marking not required for products rated 36 V |
| LED yellow 2 | switching state switch output 2 |
| LED yellow 1 | switching state switch output 1 |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Voltage drop | 2 V |
| Evaluation procedure | averaging (MxN) M = 5 N = 2 |
| Degree of protection | IP67 |
| LED red | error |
| Response delay | minimum : 60 ms Ex works settings: 120 ms |
| No-load supply current | 50 mA |
| LED green | Operating display |
| Sensing range | 60 ... 2000 mm |
| Connection type | Connector M12 x 1 , 5-pin |
| Standard target plate | 100 mm x 100 mm |
| Interface type | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit |
| Output type | 2 switch outputs PNP, NO/NC, programmable |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Dead band | 0 ... 60 mm |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| Adjustment range | 80 ... 2000 mm |
| Temperature influence | < 1.5 % of full-scale value |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Transducer frequency | approx. 175 kHz |
| Switching frequency | 5 Hz |
| Range hysteresis | programmable , preset to 1 mm |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Mass | 115 g |
| Input/output type | 1 synchronization connection, bidirectional |
| Repeat accuracy | 0.1 % of full-scale value |
Comments
No comments yet