Pepperl+Fuchs UC2000-L2M-I-T-2M
Ultrasonic sensor
- Extended temperature range
- Cable connection
- Rugged metal base
- Sensor head bidirectional and rotatable
- Function indicators visible from all directions
- Selectable sound lobe width
- Programmable
Item Number:
UC2000-L2M-I-T-2M
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Dead band | 0 ... 60 mm |
| Connection type | cable , 5-pin |
| Mass | 345 g |
| Adjustment range | 80 ... 2000 mm |
| LED green | Operating display |
| Response delay | minimum : 60 ms factory setting: 330 ms |
| Degree of protection | IP67 |
| LED red | error |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Output | evaluation limit A1: 80 mm evaluation limit A2: 2000 mm output function: rising ramp |
| Input impedance | > 12 kandOmega; |
| Input/output type | 1 synchronization connection, bidirectional |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Sensing range | 60 ... 2000 mm |
| Resolution | Evaluation range [mm]/3200, however 0.4 mm |
| Standard target plate | 100 mm x 100 mm |
| Ambient temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Output type | 1 analog output 4 ... 20 mA |
| Interface type | Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit |
| Evaluation procedure | low-pass behavior |
| Temperature influence | 1.5 % of full-scale value |
| LED yellow | object in evaluation range |
| Deviation of the characteristic curve | 0.2 % of full-scale value |
| Repeat accuracy | 0.1 % of full-scale value |
| Load impedance | 500 andOmega; at UB 14V 300 andOmega; at UB < 14V |
| Transducer frequency | approx. 175 kHz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Level (evaluation limit 2) | 4 V ... UB |
| No-load supply current | 50 mA |
| Input type | 1 program input |
| Beam width | wide |
| Level (evaluation limit 1) | 0 ... 1 V |
| Pulse length | 2 ... 10 s |
| Supplementary information | Switch settings of the external programming adapter: ""output load"": pull-down ""output logic"": noninv |
Comments
No comments yet