Pepperl+Fuchs UC250-F77-EP-IO-V31
Ultrasonic sensor
- IO-link interface for service and process data
- Programmable via DTM with PACTWARE
- Continuous distance value via IO-Link process data
- Selectable sound lobe width
- Synchronization options
- Temperature compensation
- Push-pull output
- Overview +
- Comments +
The UC250-F77-EP-IO-V31 is an advanced industrial sensor with integrated IO-Link communication. It offers a high-performance detection range, combined with robust environmental tolerance for challenging industrial applications. With its easy-to-integrate design, this sensor is ideal for automation tasks requiring high accuracy and reliability in dynamic environments.
Datasheet:
| IO-Link Revision | 1.1 |
| Transfer rate | COM 2 (38.4 kBaud) |
| Temperature influence | ?± 0.75 % of the end value (with temperature compensation) |
| No-load supply current | 40 mA |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) |
| Min. cycle time | 2.3 ms |
| Response delay | minimum : 8 ms factory setting: 29 ms |
| Dead band | 0 ... 20 mm |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| Write cycles | 300000 |
| Installation position | any position |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| UL approval | cULus Listed, Class 2 Power Source |
| SIO mode support | yes |
| LED red | solid: error flashing: switch point programming, object not detected |
| Ambient temperature | -25 ... 70 ?°C (-13 ... 158 ?°F) |
| LED green | solid: Power on flashing: Standby mode or IO-Link communication |
| Sensing range | 20 ... 250 mm |
| Repeat accuracy | ?± 0.1 % of full-scale value |
| Adjustment range | 25 ... 250 mm |
| Connection type | Connector plug M8 x 1 , 4-pin |
| Compatible master port type | A |
| Standard target plate | 10 mm x 10 mm |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Transducer frequency | approx. 400 kHz |
| Non-volatile memory | EEPROM |
| Sensor cycle time | 8 ms (factory setting) ; programmable to 60 s |
| Mass | 9 g |
| Beam width | wide |
| LED yellow | solid: object in evaluation range flashing: switch point programming, object detected |
| Rated operating current | 100 mA , short-circuit/overload protected |
| Device ID | 0x300300 (3146496) |
| Process data witdh | 16 bit |
| Input/output type | 1 synchronization connection, bidirectional |
| Output | near switch point: 25 mm far switch point: 250 mm Output mode: Window mode Output logic: normally open |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Interface type | IO-Link (via C/Q = Pin 4) |
| Voltage drop | 2.5 V |
| Device profile | Smart Sensor |
| Time delay before availability | 300 ms |
| Switching frequency | factory setting: 20 Hz programmable max. 45 Hz |
| Degree of protection | IP67 |
| Power consumption | 400 mW |
Buy Pepperl+Fuchs UC250-F77-EP-IO-V31 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is an online electrical distributor. Here you can find any spare part you need. All your items can be combined and sent in one delivery. Prices and delivery conditions are our main focus. We provide free delivery for our regular customers. Our services will save you time and money which on the other side will help you grow your business!
Comments
No comments yet