Pepperl+Fuchs UC4000-L2M-E7-T-2M Ultrasonic sensor

Pepperl+Fuchs UC4000-L2M-E7-T-2M
Item Number: UC4000-L2M-E7-T-2M
  • Extended temperature range
  • Cable connection
  • Rugged metal base
  • Sensor head bidirectional and rotatable
  • Function indicators visible from all directions
  • Selectable sound lobe width
  • Programmable
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
LED yellow 2switching state switch output 2
Connection typecable , 5-pin
Input/output type1 synchronization connection, bidirectional
Adjustment range240 ... 4000 mm
LED yellow 1switching state switch output 1
Output type2 switch outputs NPN, NO/NC, programmable
Beam widthwide
Ambient temperature-40 ... 70 В°C (-40 ... 158 В°F)
Standard target plate100 mm x 100 mm
Dead band0 ... 200 mm
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Interface typeSerial interface (programming adapter required)
9600 BPS, no parity, 8 data bits, 1 stop bit
CCC approvalCCC approval / marking not required for products rated 36 V
Output 1near switch point: 240 mm
far switch point: 4000 mm
output function: Window mode
output behavior: NO contact
Repeat accuracy 0.1 % of full-scale value
Switching frequency 2.8 Hz
Rated operating current200 mA , short-circuit/overload protected
Mass355 g
LED greenOperating display
Supplementary informationSwitch settings of the external programming adapter:
""output load"": pull-up
""output logic"": inv
Temperature influence< 1.5 % of full-scale value
Range hysteresisprogrammable , preset to 1 mm
Evaluation procedureaveraging (MxN)
M = 5
N = 2
Output 2near switch point: 500 mm
far switch point: 2000 mm
output function: Window mode
output behavior: NO contact
Voltage drop 2 V
Degree of protectionIP67
LED rederror
Operating voltage10 ... 30 V DC , ripple 10 %SS
Transducer frequencyapprox. 85 kHz
Sensing range200 ... 4000 mm
No-load supply current 50 mA
Response delayminimum : 110 ms
factory setting: 280 ms

Comments

No comments yet

Write a comment