Pepperl+Fuchs UC500-30GM-IUR2-V15
Ultrasonic sensor

Pepperl+Fuchs UC500-30GM-IUR2-V15
  • Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
  • Analog current and voltage output
  • Synchronization options
  • Adjustable acoustic power and sensitivity
  • Temperature compensation
Item Number: UC500-30GM-IUR2-V15
396.91
-
+
Total price: 396.91
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Sensing range30 ... 500 mm
Connection typeConnector plug M12 x 1 , 5-pin
LED greensolid: Power-on
flashing: Standby mode or program function object detected
UL approvalcULus Listed, General Purpose
Degree of protectionIP65
LED yellow 1solid: object in evaluation range
flashing: program function
Deviation of the characteristic curve 0.2 % of full-scale value
Synchronizationbi-directional
0 level -UB...+1 V
1 level: +4 V...+UB
input impedance: > 12 KOhm
synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
LED redsolid: temperature/program plug not connected
flashing: fault or program function object not detected
Repeat accuracy 0.1 % of full-scale value
Adjustment range50 ... 500 mm
Power consumption 900 mW
Resolutionevaluation range [mm]/4000, but 0.05 mm
Standard target plate100 mm x 100 mm
CCC approvalCCC approval / marking not required for products rated 36 V
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Operating voltage10 ... 30 V DC , ripple 10 %SS
Time delay before availability 500 ms
LED yellow 2solid: object in detection range
flashing: program function
CSA approvalcCSAus Listed, General Purpose
Dead band0 ... 30 mm
Load impedancecurrent output: 500 Ohm
voltage output: 1000 Ohm
Temperature/TEACH-IN connectorTemperature compensation , Evaluation range programming , output function setting
Outputevaluation limit A1: 60 mm
evaluation limit A2: 500 mm
rising ramp
Output type1 current output 4 ... 20 mA
1 voltage output 0 ... 10 V
Response delay21 ms minimum
63 ms factory setting
Temperature influence 2 % from full-scale value (with temperature compensation)
0.2 %/K (without temperature compensation)
Transducer frequencyapprox. 380 kHz
Interface typeRS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Mass170 g

Comments

No comments yet

Write a comment