Pepperl+Fuchs UC500-30GM70-UE2R2-V15 Ultrasonic sensor
Item Number: UC500-30GM70-UE2R2-V15
- Analog output 0 ... 10 V
- 1 switch output
- Synchronization options
- Temperature compensation
- Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
- Overview
- Datasheet
- Alternative numbers
- Comments
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Temperature drift | В± 1.5 % of full-scale value |
| Default setting | rising ramp ; evaluation limit A1: 50 mm ; evaluation limit A2: 500 mm |
| No-load supply current | 50 mA |
| Repeat accuracy | В± 0.5 mm |
| Off-state current | 10 andmicro;A |
| Voltage drop | 3 V |
| Transducer frequency | approx. 300 kHz |
| Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
| Connection type | Connector M12 x 1 , 5-pin |
| Adjustment range | 50 ... 500 mm |
| Switching hysteresis | 5 mm ( programmable ) |
| Sensing range | 45 ... 500 mm |
| Potentiometer | switch output adjustable |
| LED yellow | switching state switch output |
| Interface type | Infrared |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Mass | 140 g |
| Default setting | 50 ... 500 mm ( adjustable via potentiometer ) |
| Operating voltage | 20 ... 30 V DC (including ripple) |
| Dead band | 0 ... 45 mm |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Response delay | 60 ms |
| Switching frequency | 5 Hz |
| Degree of protection | IP65 |
| Operating current | 300 mA , short-circuit/overload protected |
| Output type | 1 voltage output 0 ... 10 V , ascending/descending programmable |
| CSA approval | cCSAus Listed, General Purpose |
| LED green/yellow | yellow: object in evaluation range green: Teach-In |
| UL approval | cULus Listed, General Purpose |
| Load resistor | 2 kandOmega; |
| Construction type | Cylindrical |
| Standard target plate | 100 mm x 100 mm |
| Output type | 1 switch output PNP, NO ( NC contact programmable ) |
Comments
No comments yet