Pepperl+Fuchs UC6000-30GM70-IE2R2-V15
Ultrasonic sensor
- Analog output 4 ... 20 mA
- 1 switch output
- Synchronization options
- Temperature compensation
- Can be parameterized via the ULTRA-PROG-IR software and interface (accessories)
Item Number:
UC6000-30GM70-IE2R2-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Off-state current10 andmicro;A
Degree of protection | IP65 |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Operating voltage | 20 ... 30 V DC (including ripple) |
Input/output type | 1 synchronization connection, bidirectional ( Factory setting: synchronized mode ) / Teach-In input |
Default setting | 400 ... 6000 mm ( adjustable via potentiometer ) |
UL approval | cULus Listed, General Purpose |
Default setting | rising ramp ; evaluation limit A1: 400 mm ; evaluation limit A2: 6000 mm |
Transducer frequency | approx. 80 kHz |
LED green/yellow | yellow: object in evaluation range green: Teach-In |
No-load supply current | 50 mA |
Adjustment range | 400 ... 6000 mm |
Temperature drift | В± 1.5 % of full-scale value |
Connection type | Connector M12 x 1 , 5-pin |
Output type | 1 current output 4 ... 20 mA , ascending/descending programmable |
Interface type | Infrared |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Potentiometer | switch output adjustable |
Switching frequency | 1 Hz |
Sensing range | 350 ... 6000 mm |
Mass | 280 g |
Dead band | 0 ... 350 mm |
Switching hysteresis | 60 mm ( programmable ) |
Voltage drop | 3 V |
Output type | 1 switch output PNP, NO ( NC contact programmable ) |
CSA approval | cCSAus Listed, General Purpose |
Construction type | Cylindrical |
Load resistor | 500 andOmega; |
LED yellow | switching state switch output |
Operating current | 300 mA , short-circuit/overload protected |
Response delay | 275 ms |
CCC approval | CCC approval / marking not required for products rated 36 V |
Standard target plate | 100 mm x 100 mm |
Repeat accuracy | В± 9 mm |
People also buy
Comments
No comments yet