Pepperl+Fuchs UC800-F77S-IU-IO-V31
Ultrasonic sensor
We ship to United States of America!
- IO-Link interface for parameterization
- Programmable via DTM with PACTWARE
- Selectable sound lobe width
- Synchronization options
- Temperature compensation
- Analog output
Item Number:
UC800-F77S-IU-IO-V31
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Degree of protection | IP67 |
| Load impedance | current output: 500 Ohm voltage output: 1000 Ohm |
| Transducer frequency | approx. 255 kHz |
| Ambient temperature | current output -25 ... 60 ?°C (-13 ... 140 ?°F) voltage output -25 ... 70 ?°C (-13 ... 158 ?°F) When fixing with one M18 nut, the temperature range for each begins with 0 ?°C (32 ?°F). |
| Response delay | minimum : 13 ms factory setting: 49 ms |
| Adjustment range | 70 ... 800 mm |
| Repeat accuracy | ?± 0.1 % of full-scale value |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Sensing range | 60 ... 800 mm |
| Standard target plate | 100 mm x 100 mm |
| Input/output type | 1 synchronization connection, bidirectional |
| Mass | 13 g |
| Resolution | current output: evaluation range [mm]/3200 but 0.35 mm voltage output: evaluation range [mm]/4000 but 0.35 mm |
| Dead band | 0 ... 60 mm |
| Storage temperature | -40 ... 85 ?°C (-40 ... 185 ?°F) |
| Sensor cycle time | 13 ms (factory setting) ; programmable to 60 s |
| LED yellow | solid: object in evaluation range flashing: programming of the limits, object detected |
| Temperature influence | ?± 0.75 % of the end value (with temperature compensation) |
| Interface type | IO-Link (after individual activation via programming button) |
| LED red | solid: fault Flashing: programming limits, object not detected |
| Tightening torque, fastening screws | with M3 nuts max. 0.2 Nm with M18 nuts max. 1 Nm |
| Output type | 1 analog output 0 (4) ... 20 mA or 1 analog output 0 ... 10 V |
| Deviation of the characteristic curve | ?± 1 % of full-scale value |
| LED green | solid: Power on flashing: Standby mode or IO-Link communication |
| No-load supply current | 50 mA |
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS |
| UL approval | cULus Listed, Class 2 Power Source |
| Connection type | Connector plug M8 x 1 , 4-pin |
| Power consumption | 500 mW |
Buy Pepperl+Fuchs UC800-F77S-IU-IO-V31 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is fast developing company in automation products. We have a great range of products and can cover most of your electrical and automation equipment needs. We sell automation equipment all over the world. Buy the original product at a reasonable price on our website. We always try to find the best delivery times and prices for all necessary products. We always work on results.
Comments
No comments yet