Pepperl+Fuchs UCC1000-30GM-E6R2-V15
Ultrasonic sensor
- High chemical resistance through PTFE coated transducer surface
- Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
- 2 programmable switch outputs
- Hysteresis mode selectable
- Window mode selectable
- Synchronization options
- Adjustable acoustic power and sensitivity
- Temperature compensation
Item Number:
UCC1000-30GM-E6R2-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Dead band | 0 ... 80 mm |
| Degree of protection | IP65 |
| Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected |
| Connection type | Connector plug M12 x 1 , 5-pin |
| No-load supply current | 50 mA |
| Sensing range | 80 ... 1000 mm |
| Standard target plate | 100 mm x 100 mm |
| LED yellow 2 | solid: switching state switch output 2 flashing: program function |
| CSA approval | cCSAus Listed, General Purpose |
| Output 2 | Switching point: 1000 mm output function: Switch point operation mode output behavior: NO contact |
| Mass | 140 g |
| Output type | 2 switch outputs PNP, NO/NC, programmable |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| UL approval | cULus Listed, General Purpose |
| Transducer frequency | approx. 175 kHz |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Ambient temperature | 0 ... 70 В°C (32 ... 158 В°F) |
| Output 1 | Switching point: 120 mm output function: Switch point operation mode output behavior: NO contact |
| Response delay | 65 ms minimum 195 ms factory setting |
| Adjustment range | 120 ... 1000 mm |
| Voltage drop | 2.5 V |
| Temperature influence | 2 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| LED green | solid: Power-on flashing: Standby mode or program function object detected |
| Switching frequency | 2.5 Hz |
| LED yellow 1 | solid: switching state switch output 1 flashing: program function |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Repeat accuracy | 0.1 % of full-scale value |
| Temperature/TEACH-IN connector | Temperature compensation , Switch points programming , output function setting |
Comments
No comments yet