Pepperl+Fuchs UCC1000-30GM-IUR2-V15
Ultrasonic sensor
High chemical resistance through PTFE coated transducer surface
Item Number:
UCC1000-30GM-IUR2-V15
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Ultrasonic sensor with high chemical resistance through PTFE coated transducer surface
Datasheet:
- Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 300.
- Analog current and voltage output
- Synchronization options
- Adjustable acoustic power and sensitivity
- Temperature compensation
- CSA approvalcCSAus Listed, General Purpose
Dead band | 0 ... 80 mm |
Sensing range | 80 ... 1000 mm |
CCC approval | CCC approval / marking not required for products rated 36 V |
Ambient temperature | 0 ... 70 В°C (32 ... 158 В°F) |
Standard target plate | 100 mm x 100 mm |
Temperature influence | 2 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
Connection type | Connector plug M12 x 1 , 5-pin |
Adjustment range | 100 ... 1000 mm |
Output | evaluation limit A1: 100 mm evaluation limit A2: 1000 mm rising ramp |
Interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit |
Load impedance | current output: 500 Ohm voltage output: 1000 Ohm |
Degree of protection | IP65 |
UL approval | cULus Listed, General Purpose |
Mass | 170 g |
LED yellow 1 | solid: object in evaluation range flashing: program function |
Power consumption | 900 mW |
Response delay | 65 ms minimum 195 ms factory setting |
Deviation of the characteristic curve | 0.2 % of full-scale value |
Time delay before availability | 500 ms |
Repeat accuracy | 0.1 % of full-scale value |
LED red | solid: temperature/program plug not connected flashing: fault or program function object not detected |
LED yellow 2 | solid: object in detection range flashing: program function |
Transducer frequency | approx. 175 kHz |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Output type | 1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V |
Synchronization | bi-directional 0 level -UB...+1 V 1 level: +4 V...+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
LED green | solid: Power-on flashing: Standby mode or program function object detected |
Resolution | evaluation range [mm]/4000, but 0.35 mm |
Temperature/TEACH-IN connector | Temperature compensation , Evaluation range programming , output function setting |
People also buy
Comments
No comments yet