Pepperl+Fuchs UCC4000-50GK-B26-8MOL
Ultrasonic sensor

Pepperl+Fuchs UCC4000-50GK-B26-8MOL
  • Thread M50
  • PTFE coated transducer
  • Power save mode
  • PWM output
  • Physical LIN interface
  • Serial Interfaces
  • Temperature compensation
Item Number: UCC4000-50GK-B26-8MOL
81.80
-
+
Total price: 81.80
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Sensing range250 ... 4000 mm
Standard target plate100 mm x 100 mm
Transfer rate19.2 kBit/s (8N1)
Time delay before availability≤ 95 ms
Connection typecable L = 276 mm В± 20 mm with Molex connector 70107-0007, 8-pin
Output typePWM output (PNP) , not short-circuit protected
Resolution16 mm (corresponding to 1 LSB)
Degree of protectionIP66 / IP67 ( connector excluded )
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Mass100 g
Beam widthwide
Transducer frequencyapprox. 75 kHz
Power consumption≤ 250 mW in the measurement operating mode
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Dead band0 ... 250 mm
Cycle time80 ms
OutputPWM output (PNP)
Temperature compensation
Address setting 7
Input typeStandby active
Output rated operating currentmax. 10 mA
Quiescent current indication< 3 ВµA during standby mode at UART- and PWM operation
Storage temperature-40 ... 85 В°C (-40 ... 185 В°F)
Resolution16 mm (corresponding to 1 LSB)
Interface typePhysical LIN interface
Resolutionpulse length 10 Вµs /cm
Signal levellow: 0 ... 0.8 V
Operating voltagefor UART and PWM operation:
UUART/PWM = 2.5 ... 5 V DC, typical 3.3 V
for LIN operation:
ULIN = 8 ... 18 V DC, typical 12 V
Scope of delivery2 nuts plastic
No-load supply current≤ 60 mA at 3.3 V DC
≤ 20 mA at 12 V DC
Temperature influence3 % of full-scale value over the entire temperature range
Interface typeUART 3.3V

Comments

No comments yet

Write a comment