Pepperl+Fuchs UGB-18GM50-255-2E3-M1
Splice sensor
- Ultrasonic system for splice detection
- Short version
- Insensitive to printing, colors, and shining surfaces
- Very high processing speeds are possible.
Item Number:
UGB-18GM50-255-2E3-M1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Impedance | 10 kandOmega; |
| LED yellow | Display: splice detected |
| No-load supply current | < 60 mA |
| Pulse extension | 120 ms programmable |
| Switch-off delay | 600 micro/s |
| Sensing range | 20 ... 60 mm , optimal distance: 45 mm |
| Switch-on delay | 600 micro/s |
| Mass | 150 g |
| LED green | Display: readiness |
| Voltage drop | 3 V |
| Pulse length | 500 ms |
| CSA approval | cCSAus Listed, General Purpose |
| Degree of protection | IP67 |
| LED red | Indication: No sheet detected (Air) |
| UL approval | cULus Listed, General Purpose |
| Ambient temperature | 0 ... 60 В°C (32 ... 140 В°F) |
| Output type | 2 switch outputs PNP, NC |
| Input type | Teach-In input 0-level: -UB ... -UB + 1V 1-level: +UB - 1 V ... +UB |
| Rated operating current | 2 x 100 mA , short-circuit/overload protected |
| Transducer frequency | 255 kHz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
| Connection | 2 m PVC cable 0.14 mm2 |
| Operating voltage | 18 ... 30 V DC , ripple 10 %SS |
Comments
No comments yet