Pepperl+Fuchs UGB-18GM50-255-2E3-Y249022 Splice sensor

Pepperl+Fuchs UGB-18GM50-255-2E3-Y249022
Item Number: UGB-18GM50-255-2E3-Y249022
  • Ultrasonic system for splice detection
  • Short version
  • Insensitive to printing, colors, and shining surfaces
  • Very high processing speeds are possible.
  • Especially suitable for splices with highly inhomogeneous materials, e.g., packaging paper.
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Mass150 g
Degree of protectionIP67
Pulse extension 120 ms programmable
Ambient temperature0 ... 60 В°C (32 ... 140 В°F)
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Operating voltage18 ... 30 V DC , ripple 10 %SS
LED yellowDisplay: splice detected
No-load supply current< 60 mA
LED redIndication: No sheet detected (Air)
Core cross-section0.14 mm2
CSA approvalcCSAus Listed, General Purpose
Pulse length 500 ms
Voltage drop 3 V
LED greenDisplay: readiness
Switch-on delay 600 micro/s
Transducer frequency255 kHz
Connection typecable PVC , 2 m
Input typeTeach-In input
0-level: -UB ... -UB + 1V
1-level: +UB - 1 V ... +UB
Rated operating current2 x 100 mA , short-circuit/overload protected
Sensing range20 ... 60 mm , optimal distance: 45 mm
CCC approvalCCC approval / marking not required for products rated 36 V
Impedance 10 kandOmega;
Switch-off delay 600 micro/s
Output type2 switch outputs PNP, NC
UL approvalcULus Listed, General Purpose

Comments

No comments yet

Write a comment