Pepperl+Fuchs VAA-4E4A-G11-ZAJ/EA2L-FV1
AS-Interface sensor/actuator module
We ship to United States of America!
- Inputs for 2-, 3-, and 4-wire sensors
- Power supply of outputs from the external auxiliary voltage
- Supply of sensors from AS-Interface
- Function display for bus, external auxiliary voltage, in- and outputs
- Red LED per channel, lights up in the event of output overload
- Communication monitoring
- Switchable lead breakage detection (outputs)
- Cable piercing method with gold plated contact pins
- Degree of protection IP68 / IP69K
- AS-Interface POWER24
Item Number:
VAA-4E4A-G11-ZAJ/EA2L-FV1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Signal delay | < 1 ms (input/AS-Interface) |
| Rated operating current | 40 mA (without sensors) / max. 240 mA |
| Auxiliary voltage (output) | 20 ... 30 V DC PELV |
| Supply | from AS-Interface |
| AS-Interface specification | V3.0 |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
| Altitude | 2000 m above MSL |
| Slave type | Standard slave |
| Voltage | 12 ... 31 V |
| Protection class | III |
| ID code | F |
| ID1 code | F |
| Current | 2 A per output TB 40 °C: 6 A total TB 70 °C: sum O1 + O2 max. 2 A, sum O3 + O4 max. 2 A |
| Input current | 9 mA (limited internally) |
| Degree of protection | EN 60529:2000 |
| Voltage | (UAUX - 0.5 V) |
| Degree of protection | IP68 / IP69K |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Connection | AS-Interface/UAUX: AS-Interface flat cable or M12 round connector Inputs/outputs: M12 round connector |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| Pollution degree | 3 |
| Required master specification | V2.1 |
| LED AS-i/FAULT | Status display; multi-colour LED Green: normal operation Red: communication fault Flashing yellow/red: address 0 Flashing green/red: sensor supply i.e. overload or lead interruption outputs |
| ID2 code | E |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Fieldbus standard | EN 62026-2:2013 |
| IO code | 7 |
| Rated operating voltage | 18,0 ... 31.6 V from AS-Interface |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Input/Output | safe isolation, rated insulation voltage 40 V DC |
| AS-Interface | EN 62026-2:2013 |
| Input | EN 61131-2:2007 |
| Profile | S-7.F |
| Mass | 200 g |
| Current loading capacity | 200 mA, overload and short-circuit protected |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Climatic conditions | For indoor use only |
| Tightening torque, cable gland | 0.4 Nm |
| Parameter bits (programmable via AS-i) | function |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| LED IN | switching state (input); 4 LED yellow |
| Output/AS-Interface | safe isolation, rated insulation voltage 40 V DC |
| UL File Number | E223772 |
| Mounting | Mounting plate |
| Data bits (function via AS-Interface) | |
| Relative humidity | 85 % , noncondensing |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Emitted interference | EN 61000-6-4:2007 |
| LED OUT | switching state (output); 4 LED yellow/red yellow: output active red: output overload or lead interruption |
| Tightening torque, housing screws | 1.8 Nm |
| Supply | from external auxiliary voltage UAUX |
Buy Pepperl+Fuchs VAA-4E4A-G11-ZAJ/EA2L-FV1 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is an online electrical distributor. We offer a wide range of electronic automation products. We ship to any location in the world. We provide discounts of 5% or more to regular customers. We've made it easy for you to find spare parts. We understand your needs and constantly strive to work more efficiently to solve them.
Comments
No comments yet