Pepperl+Fuchs VAA-4E4A-G11-ZAJ/EA2L-V1
AS-Interface sensor/actuator module

Pepperl+Fuchs VAA-4E4A-G11-ZAJ/EA2L-V1
We ship to United States of America!
  • Inputs for 2-, 3-, and 4-wire sensors
  • Power supply of outputs from the external auxiliary voltage
  • Supply of sensors from AS-Interface
  • Function display for bus, external auxiliary voltage, in- and outputs
  • Red LED per channel, lights up in the event of output overload
  • Communication monitoring
  • Switchable lead breakage detection (outputs)
  • Degree of protection IP68 / IP69K
  • AS-Interface POWER24
Item Number: VAA-4E4A-G11-ZAJ/EA2L-V1
Price on Request
-
+
Total price: € 0.00
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
  • Overview +
  • Comments +
Signal delay< 1 ms (input/AS-Interface)
UL File NumberE223772
Tightening torque, cable gland0.4 Nm
MountingMounting plate
Storage temperature-25 ... 85 ?Β°C (-13 ... 185 ?Β°F)
Mass200 g
LED AS-i/FAULTStatus display; multi-colour LED
Green: normal operation
Red: communication fault
Flashing yellow/red: address 0
Flashing green/red: sensor supply i.e. overload or lead interruption outputs
InputEN 61131-2:2007
Rated operating voltage18,0 ... 31.6 V from AS-Interface
ID2 codeE
ID1 codeF
AS-InterfaceEN 62026-2:2013
Slave typeStandard slave
Relative humidity85 % , noncondensing
ID codeF
Climatic conditionsFor indoor use only
Emitted interferenceEN 61000-6-4:2007
Switching pointaccording to DIN EN 61131-2 (Type 2)
Voltage12 ... 31 V
Output/AS-Interfacesafe isolation, rated insulation voltage 40 V DC
Current loading capacity 200 mA, overload and short-circuit protected
Parameter bits (programmable via AS-i)function
Voltage (UAUX - 0.5 V)
Required master specification V2.1
LED OUTswitching state (output); 4 LED yellow/red
yellow: output active
red: output overload or lead interruption
Degree of protectionIP68 / IP69K
Pollution degree3
Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks
10 g, 16 ms in 6 spatial directions 1000 shocks
IO code7
Tightening torque, housing screws1.8 Nm
Ambient temperature-25 ... 70 ?Β°C (-13 ... 158 ?Β°F)
Supplyfrom AS-Interface
Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013
Input current 9 mA (limited internally)
Fieldbus standardEN 62026-2:2013
Degree of protectionEN 60529:2000
ConnectionAS-Interface/UAUX: M12 round connector
Inputs/outputs: M12 round connector
LED INswitching state (input); 4 LED yellow
Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Input/Outputsafe isolation, rated insulation voltage 40 V DC
Data bits (function via AS-Interface) input output
Auxiliary voltage (output)20 ... 30 V DC PELV
LED AUXext. auxiliary voltage UAUX; dual LED green/red
green: voltage OK
red: reverse voltage
Surge protectionUAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)
Altitude 2000 m above MSL
AS-Interface specificationV3.0
ProfileS-7.F
Supplyfrom external auxiliary voltage UAUX
Rated operating current 40 mA (without sensors) / max. 240 mA
Protection classIII
Number/Type4 inputs for 2- or 3-wire sensors (PNP), DC
option 2 inputs for 4-wire sensors (PNP), DC
Current2 A per output
TB 40 ?Β°C: 6 A total
TB 70 ?β€š?Β°C: sum O1 + O2 max. 2 A, sum O3 + O4 max. 2 A
Number/Type4 electronic outputs, PNP, overload and short-circuit proof

Buy Pepperl+Fuchs VAA-4E4A-G11-ZAJ/EA2L-V1 with the best possible price and delivery terms on eltra-trade.com

eltra-trade.com is an online electrical parts store. We offer a huge industrial automation products list. We ship to every country with the shortest possible terms. Get the original products of many brands from Eltra Trade company with guaranteed quality. Our managers are always quick to answer customer queries. Thanks to us you will be able to get rid of the cooperation with many suppliers, which greatly accelerates and facilitates your work.

Comments

No comments yet

Write a comment