Pepperl+Fuchs VAA-4E4A-G12-ZAJ/EA2L
AS-Interface sensor/actuator module
- One-piece housing with stainless steel base
- Installation without tools
- Metal threaded inserts with SPEEDCON technology
- Flat cable connection with cable piercing technique, variable flat cable guide
- Red LED per channel, lights up in the event of output overload
- Communication monitoring, configurable
- Inputs for 2-, 3-, and 4-wire sensors
- DIN rail mounting
- AS-Interface certificate
Item Number:
VAA-4E4A-G12-ZAJ/EA2L
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| Pollution degree | 3 |
| Diagnostic Coverage (DC) | 0 % |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
| IO code | 7 |
| Voltage | (UAUX - 0.5 V) |
| Connection | Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| MTTFd | 190 a |
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral |
| Voltage | 21 ... 31 V |
| UL File Number | E223772 |
| Required master specification | V2.1 |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5g 57 ... 50 Hz |
| Relative humidity | 85 % , noncondensing |
| ID1 code | F |
| Degree of protection | EN 60529:2000 |
| Supply | from AS-Interface |
| Mission Time (TM) | 20 a |
| Rated operating current | 40 mA (without sensors) / max. 240 mA |
| ID2 code | E |
| Mass | 230 g |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Emitted interference | EN 61000-6-4:2007 |
| ID code | F |
| Slave type | Standard slave |
| Current | 2 A per output 6 A total (TB 40 В°C) 4 A total (TB 70 В°C) |
| Input current | 8 mA (limited internally) |
| Parameter bits (programmable via AS-i) | function |
| Fieldbus standard | EN 62026-2:2013 |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Signal delay | < 1 ms (input/AS-Interface) |
| Tightening torque, cable gland | 0.4 Nm |
| Data bits (function via AS-Interface) | |
| Degree of protection | IP67 |
| AS-Interface | EN 62026-2:2013 |
| Supply | from external auxiliary voltage UAUX |
| Protection class | III |
| Current loading capacity | 200 mA, overload and short-circuit protected |
| Input | EN 61131-2 |
| AS-Interface specification | V3.0 |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| Climatic conditions | For indoor use only |
| Auxiliary voltage (output) | 24 V DC В± 15 % PELV |
| Profile | S-7.F |
| LED IN | switching state (input); 4 LED yellow |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| LED OUT | Switching status (output); 4 yellow/red LEDs Yellow: output active Red: output overload |
| Mounting | Mounting plate |
| Altitude | 2000 m above MSL |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Comments
No comments yet