Pepperl+Fuchs VAA-4E4A-G4-ZE/E2
AS-Interface sensor/actuator module
We ship to United States of America!
- Degree of protection IP65
- Flat or round cable connection (via standardized EEMS base, not included with delivery)
- Cable piercing method for flat cable
- Communication monitoring, turn-off
- Inputs for 2- and 3-wire sensors
- Power supply of outputs from the external auxiliary voltage
- Power supply of inputs from the module
- Function display for bus, ext. auxiliary voltage, inputs and outputs
- Monitoring of sensor overloads
Item Number:
VAA-4E4A-G4-ZE/E2
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Current | 1 A per output, 4 A total |
| Voltage | (UAUX - 0.5 V) |
| Degree of protection | EN 60529:2000 |
| Slave type | Standard slave |
| Parameter bits (programmable via AS-i) | function |
| Altitude | 2000 m above MSL |
| Ambient temperature | -25 ... 60 В°C (-13 ... 140 В°F) |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Relative humidity | 85 % , noncondensing |
| Pollution degree | 3 |
| Voltage | 21 ... 31 V |
| AS-Interface | EN 62026-2:2013 |
| Protection class | III |
| IO code | 7 |
| UL File Number | E223772 |
| Mission Time (TM) | 20 a |
| Auxiliary voltage (output) | 24 V DC В± 15 % PELV |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| MTTFd | 150 a |
| Input | EN 61131-2:2007 |
| Data bits (function via AS-Interface) | |
| Tightening torque, housing screws | 0.8 Nm |
| Climatic conditions | For indoor use only |
| ID1 code | F |
| Diagnostic Coverage (DC) | 0 % |
| Input current | 9 mA (limited internally) |
| ID2 code | E |
| LED PWR/FAULT | dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply or outputs |
| Mass | 350 g |
| Supply | from external auxiliary voltage UAUX |
| AS-Interface specification | V3.0 |
| Fieldbus standard | EN 62026-2:2013 |
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| LED OUT | Switching state (output); 4 LED yellow |
| Connection | cable piercing method or terminal compartment yellow flat cable/black flat cable or standard round cable inputs/outputs:M12 x 1.5 cable glands and cage tension spring terminals |
| LED IN | switching state (input); 4 LED yellow |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| Supply | from AS-Interface |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
| Current loading capacity | 200 mA (TB 40 В°C), 160 mA (TB 60 В°C), short-circuit protected |
| Profile | S-7.0 |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Mounting | DIN rail or screw mounting |
| Emitted interference | EN 61000-6-4:2007 |
| Required master specification | V2.0 |
| Rated operating current | 30 mA (without sensors) / max. 230 mA |
| ID code | 0 |
| Degree of protection | IP65 |
Buy Pepperl+Fuchs VAA-4E4A-G4-ZE/E2 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a trusted industrial automation supplier. We offer a vast selection of products from renowned manufacturers. Worldwide delivery is available, ensuring you receive your order promptly. Competitive prices and exceptional service are our priorities. Experience the benefits of partnering with us for your automation needs.
Comments
No comments yet