Pepperl+Fuchs VAA-4E4A-KE5-ZEJQ/E2L
AS-Interface sensor/actuator module

Pepperl+Fuchs VAA-4E4A-KE5-ZEJQ/E2L
We ship to United States of America!
  • Housing with push-in connection technology and mechanically coded terminal blocks
  • Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
  • Selectable supply to the sensors: External or from the module
  • Function display for bus, external auxiliary voltage, internal sensor supply, inputs, and outputs
  • Red LED per channel, lights up in the event of output overload
Item Number: VAA-4E4A-KE5-ZEJQ/E2L
153.54
-
+
Total price: 153.54
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
LED PWRAS-Interface voltage; green LED
green: voltage OK
flashing green: address 0
AS-InterfaceEN 62026-2:2013
Pollution degree2
LED INswitching state (input); 4 LED yellow
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
MountingDIN mounting rail
Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026:2013
Rated insulation voltage92 V
Auxiliary voltage (input)12 ... 30 V DC PELV
LED FAULTError display; red LED
red: communication error, i.e. address is 0
red flashing: overload internal input supply, i.e. overload or lead interruption outputs
Functional safetyEN ISO 13849-1:2008 EN ISO 13849-2:2012
Number/Type4 electronic outputs, PNP, overload and short-circuit proof
Current2 A Per output, total 4 A (TB 60 В°C)
1 A Per output, total 4 A (TB 70 В°C)
ConnectionRemovable push-in terminals
rated connection capacity:
rigid: 0.20 mm2 ... 1.5 mm2
flexible (without wire end ferrule): 0.20 mm2 ... 2.5 mm2
flexible (with wire end ferrule): 0.25 mm2 ... 1.5 mm2
Signal delay< 1 ms (input/AS-Interface)
Voltage21 ... 31 V DC (INT)
Pulse withstand voltage0.8 kV
ID2 codeE
MTBF141 a
Degree of protectionEN 60529:2000
Data bits (function via AS-Interface) input output
Degree of protectionIP20
For safety applications: Installation in an enclosure with a minimum protection class of IP54 required
Supplyfrom AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT)
LED AUXext. auxiliary voltage UAUX; dual LED green/red
green: voltage OK
red: reverse voltage
Input current 5.6 mA (max.)
InputEN 61131-2:2004
Emitted interferenceEN 61000-6-4:2007
Parameter bits (programmable via AS-i)function
Required master specification V2.0
Shock and impact resistance15 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Surge protectionUEXT, UAUX, Ue: overvoltage category II, safe isolated power supplies (PELV)
Overvoltage category of the power supplies (primary): III
ProfileS-7.0
Protection classIII
Auxiliary voltage (output)20 ... 30 V DC PELV
Number/Type4 inputs for 3-wire sensors (PNP), DC
Supplyfrom external auxiliary voltage UAUX
Mass110 g
Fieldbus standardEN 62026-2:2013
ID1 codeF
Rated operating current 35 mA (without sensors) / max. 190 mA
Climatic conditionsFor indoor use only
Switching pointaccording to DIN EN 61131-2 (type 1)
LED INTInternal input supply active; LED green
Voltage (UAUX - 0.5 V)
Current loading capacity 150 mA, overload- and short-circuit protected (INT)
ID code0
Relative humidity85 % , noncondensing
Slave typeStandard slave
UL File NumberE223772
LED OUTswitching state (output); 4 LED yellow/red
yellow: output active
red: output overload or lead interruption
Vibration resistance0.35 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Usage categoryDC-13
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Altitude 2000 m above MSL
IO code7
Electrical safetyIEC 61140:2009
AS-Interface specificationV3.0

Buy Pepperl+Fuchs VAA-4E4A-KE5-ZEJQ/E2L with the best possible price and delivery terms on eltra-trade.com

Discover a wide range of industrial electrical products at eltra-trade.com. We specialize in finding any part you need and providing prompt delivery. Benefit from our premium quality products and competitive prices. Partner with us for your electrical supply needs and experience outstanding service.

Comments

No comments yet

Write a comment