Pepperl+Fuchs VAN-115/230AC-K16
AS-Interface power supply
We ship to United States of America!
- AS-Interface certificate
- PELV/SELV
- LED operating display
- 8 A output load
- 115 V AC / 230 V AC switchable
- AS-Interface data decoupling
- Overload protection using FUSE mode
Item Number:
VAN-115/230AC-K16
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
VAN-115/230AC-K16 - This AS-Interface power supply module provides 230 V AC input and 24 V DC output with a power rating of 4 A. The compact VAN-115/230AC-K16 is engineered for reliable power conversion and is suitable for integration in various AS-i network systems.
Degree of protectionIP20 according to EN 60529
| Capacity factor | > 0.5 |
| Residual ripple | 50 mVss (500 kHz bandwidth, 50-andOmega;-measurement with ohmic load) |
| Ambient temperature | -10 ... 70 ?°C (14 ... 158 ?°F) (Measured 25 mm below the device) from 60?° C 6W/?°C power recovery necessary |
| Efficiency | typ. 92 % (at 230 V AC/8 A) |
| Current limit | > 8.4 A |
| LED IR on | red LED: ON: Plug-in jumper position 2-3 OFF: Plug-in jumper position 1-2 |
| UL File Number | E223176 |
| LED AS-i ok | operating display; LED green |
| Mass | approx. 890 g |
| Voltage | 30.55 V DC ?± 3 % |
| Short-circuit current | 12 ... 25 A (max. 5 s) |
| Electromagnetic compatibility | emitted interference in accordance with EN 50081-2 class B (EN 55011, EN 55022) noise immunity in accordance with EN 61000-6-2, EN 61000-4-2 to EN 61000-4-6, EN 61000-4-11 |
| Reset push-button switch | FUSE mode reset |
| Connection | Connection terminals, max. conductor cross-section flexible: 0.5 ... 4 mm2 fixed: 0.5 ... 6 mm2 stripped length 7 mm, connector sleeves are permissible |
| Pollution degree | 2 |
| Galvanic isolation | overvoltage category III |
| Rated operating current | 6,0 A (Switch position 115 V) 2.8 A (Switch position 230 V) |
| Fusing | T8A/250 V AC HBC (not accessible) |
| Short-circuit protection/overload | FUSE Mode (2 ... 5 s current, then trips) |
| Current | 8 A |
| Plug-in jumper | Position 1-2: Communication Mode Position 2-3: IR addressing |
| LED Overload | red LED, flashes in the FUSE mode |
| Power selection switch | changeover switch for 115 V AC/230 V AC |
| Protection class | 1 (IEC 60536); Protective conductor connection necessary |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Surge protection | limited to max. 55 V |
| Rated operating voltage | nominal: 100 ... 120 V AC/220 ... 240 V AC (front end selectable) permissible: 85 ... 132 V AC/184 ... 264 V AC/230 ... 375 V DC |
| Supply frequency | 47 ... 63 Hz or DC |
Buy Pepperl+Fuchs VAN-115/230AC-K16 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com provides top-notch industrial control components. Our online catalog features a diverse selection of products, all available for fast delivery. Benefit from our competitive prices and excellent customer support. Trust us to meet your automation equipment requirements.
Comments
No comments yet