Pepperl+Fuchs VAN-115/230AC-K19
AS-Interface power supply
- Up to 2.8 A output load
- Power factor correction
- Electronic overload protection and display
- LED operating display
- AS-Interface data decoupling
- PELV/SELV
- NEC Class 2 Power Supply
Item Number:
VAN-115/230AC-K19
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Mounting | DIN mounting rail |
| Protection class | I, Protective conductor connection necessary |
| UL File Number | E223176 |
| Connection | Connection terminals, max. conductor cross-section 0.5 ... 6 mm2 (20-10 AWG), Stripping length 7 mm |
| Rated operating voltage | nominal: 100 ... 120 VAC/220 ... 240 VAC permissible: 85 ... 132 VAC/184 ... 264 VAC |
| Mass | approx. 500 g |
| Current | 2.8 A |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Ambient temperature | -10 ... 70 В°C (14 ... 158 В°F) |
| Degree of protection | IP20 |
| Efficiency | 90.5 % (230 VAC, 2.8 A) |
| Residual ripple | 50 mVss (500 kHz bandwidth, 50-andOmega;-measurement with ohmic load) |
| Voltage | 30.55 VDC В± 3 % fixed |
| Short-circuit current | min. 3.2 A, max. 4.6 A |
| Pollution degree | 2 (EN 60950) |
| Fusing | 2.5 AT (not replacable) |
| LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
| Current limit | > 3.2 A |
| Rated operating current | 2.0 A at 115 VAC 0.9 A at 230 VAC |
| Supply frequency | 47 ... 63 Hz |
| Capacity factor | > 0.5 |
Comments
No comments yet