Pepperl+Fuchs VAN-115/230AC-K27
AS-Interface power supply
- Up to 4 A output load
- LED operating display
- 100 V AC up to 240 V AC
- AS-Interface filter integrated
- Earth fault detection
Item Number:
VAN-115/230AC-K27
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Current limit | starts at > 4.2 A |
Pollution degree | 2 |
Supply frequency | 47 ... 63 Hz (alternatively, DC possible) |
Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Connection | Connection terminals, max. conductor cross-section Flexible cable: 0.5 andhellip; 4 mm2 Rigid cable: 0.5 andhellip; 6 mm2 Stripping length 7 mm |
UL File Number | E223176 |
Rated operating voltage | 85 andhellip; 132 VAC 184 andhellip; 264 VAC 240 andhellip; 300 VDC |
Galvanic isolation | SELV/PELV |
Fusing | T3A 15/250 V HBC (not accessible) |
Efficiency | typ. 90 % (230 VAC, 4 A) |
Voltage | 30.5 VDC В±3 % fixed |
Degree of protection | IP20 |
Rated operating current | 2.7 A at 115 VAC 1.3 A at 230 VAC |
Ambient temperature | -10 ... 70 В°C (14 ... 158 В°F) Note derating |
Current | 4 A |
Residual ripple | < 50 mVSS (500 kHz bandwidth, 50 andOmega; measurement, with resistive load) |
Protection class | 1 (IEC 60536); Protective conductor connection necessary |
Mounting | DIN mounting rail |
Reset push-button switch | earth fault simulation/reset of earth fault display |
Short-circuit protection/overload | > 4,2 A < 6.5 A |
LED EFD | earth fault display; LED red |
LED AS-i ok | LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
Overvoltage protected | limited to max. 55 V |
Peak inrush current | < 3.7 A2s (120 VAC) < 4.6 A2s (132 VAC) < 2.5 A2s (230 VAC) < 3.3 A2s (264 VAC) |
Mass | 650 g |
People also buy
Comments
No comments yet