Pepperl+Fuchs VBA-2A-G11-IL-V1
AS-Interface analog module

Pepperl+Fuchs VBA-2A-G11-IL-V1
  • Degree of protection IP68 / IP69K
  • Function display for bus, external auxiliary voltage and outputs
  • Power supply of outputs from the external auxiliary voltage
  • Accuracy В± 0.15 %
  • Integrated shielding
  • Channel-specific output monitoring
  • Communication monitoring
Item Number: VBA-2A-G11-IL-V1
259.12
-
+
Total price: 259.12
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
LED AS-i/FAULTStatus display; multi-colour LED
Green: normal operation
Red: communication fault
Flashing yellow/red: address 0
Flashing green/red: peripheral fault
Required master specification V2.1
AS-InterfaceEN 62026-2:2013
Pollution degree3
Rated operating voltage26.5 ... 31.6 V from AS-Interface
ID code3
Slave typeStandard slave
ID1 codeF
Supplyfrom AUX
Resolution6 andmicro;A
Relative humidity85 % , noncondensing
MTTFd365 a
Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, IEC 62026-2:2008
MountingMounting plate
Altitude 2000 m above MSL
Auxiliary voltage (output)24 V DC В± 15 % PELV
ID2 code5
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
IO code7
Tightening torque, housing screws1.8 Nm
Tightening torque, cable gland0.4 Nm
LED AUXext. auxiliary voltage UAUX; dual LED green/red
green: voltage OK
red: reverse voltage
ConnectionAS-Interface/UAUX: M12 round connector
Outputs: M12 round connector
Data bits (function via AS-Interface)The transfer of the data value is based on AS-Interface Profile 7.3.
ProfileS-7.3.5
Emitted interferenceEN 61000-6-4:2007
Parameter bits (programmable via AS-i)function
Degree of protectionEN 60529:2000
Accuracy0.15 % of full-scale value
Mass200 g
LED ANALOGStatus of output signal; yellow LED
Yellow: 0 mA I 23 mA
Yellow flashing: lead breakage or I > 23 mA
Diagnostic Coverage (DC)0 %
Current loading capacity 700 mA (signal current + actuator supply) from external bulk power supply UAUX, overload and short-circuit protected
UL File NumberE223772
Fieldbus standardEN 62026-2:2013
AS-Interface specificationV3.0
Climatic conditionsFor indoor use only
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Degree of protectionIP68 / IP69K
Surge protectionUAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)
Rated operating current 35 mA
Temperature influence1 andmicro;A/K
Number/Type2 analog outputs (current), 0 ... 20 mA
Protection classIII
Loadmax. 600 andOmega;
Mission Time (TM)20 a

Comments

No comments yet

Write a comment