Pepperl+Fuchs VBA-2E-G10-ZAL-1M-2V31-G
AS-Interface sensor/actuator module

Pepperl+Fuchs VBA-2E-G10-ZAL-1M-2V31-G
  • Ultra-compact enclosure
  • Gold-plated and machined contacts
  • One piece housing
  • Degree of protection IP68 / IP69K
  • Direct connection via cable outlet
Item Number: VBA-2E-G10-ZAL-1M-2V31-G
79.95
-
+
Total price: 79.95
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Parameter bits (programmable via AS-i)function
Data bits (function via AS-Interface) input output
IO code0
AS-Interface specificationV3.0
Tightening torque, fastening screws1.65 Nm
Surge protectionUAUX, Uin: Over voltage category III, safe isolated power supplies (PELV)
Degree of protectionIP67
IP67 / IP68 / IP69K with flat cable VAZ-FK-S-*
Input current 9 mA (limited internally)
Slave typeA/B slave
ID2 codeE
Fieldbus standardEN 62026-2:2013
Voltage20 ... 30 V
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
AS-InterfaceEN 62026-2:2013
UL approvalcULus Listed, Type 1 enclosure
Auxiliary voltage20 ... 30 V DC PELV
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Current loading capacity 1000 mA overload and short-circuit resistant
LED FAULTFault indication; red LED
Red: Communication fault or address is 0
Flashing red: Sensor supply overload or no external auxiliary power UAUX
InputEN 61131-2:2007
Switching pointaccording to DIN EN 61131-2 (Type 2)
ID codeA
Required master specification V2.1
Signal delay< 1 ms (input/AS-Interface)
Protection classIII
LED INswitching state (input); 2 LED yellow
Emitted interferenceEN 61000-6-4:2007
Degree of protectionEN 60529:2000
Rated operating voltage18.5 ... 31.6 V from AS-Interface
Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Number/Type2 inputs for 2- or 3-wire sensors (PNP), DC
Mass100 g
Rated operating current 40 mA / max. 60 mA
ConnectionAS-Interface, AUX: Insulation piercing technology
Yellow flat cable/black flat cable
Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104
Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded)
Matching connector: LM004-Gx1-A or similar
Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded)
Matching connector: NM003-Sx1-A or similar
ProfileS-0.A.E
Tightening torque, cable gland0.4 Nm
ID1 code7
Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks
10 g, 16 ms in 6 spatial directions 1000 shocks
Supplyfrom external auxiliary voltage UAUX
LED AS-iAS-Interface voltage; LED green
UL File NumberE223772 ""For use in NFPA 79 Applications only""
Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013

Comments

No comments yet

Write a comment