Pepperl+Fuchs VBA-2E-G10-ZEJ-0,1M-2V3-G
AS-Interface sensor module
- Ultra-compact enclosure
- Gold-plated and machined contacts
- One piece housing
- Degree of protection IP68 / IP69K
- Direct connection via cable outlet
Item Number:
VBA-2E-G10-ZEJ-0,1M-2V3-G
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Current loading capacity | 75 mA at TB 40 В°C (104 В°F) 60 mA at TB 75 В°C (167 В°F) overload and short-circuit resistant |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC |
| Mass | 100 g |
| ID code | A |
| Profile | S-0.A.2 |
| Protection class | III |
| Tightening torque, fastening screws | 1.65 Nm |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| LED AS-i | AS-Interface voltage; LED green |
| ID1 code | 7 |
| Data bits (function via AS-Interface) | |
| Supply | from AS-Interface |
| Slave type | A/B slave |
| ID2 code | 2 |
| Input current | 9 mA (limited internally) |
| IO code | 0 |
| Voltage | 21 ... 31 V |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Signal delay | < 1 ms (input/AS-Interface) |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| AS-Interface specification | V3.0 |
| UL File Number | E223772 ""For use in NFPA 79 Applications only"" |
| Rated operating current | 40 mA (without sensors) / max. 120 mA |
| UL approval | cULus Listed, Type 1 enclosure |
| AS-Interface | EN 62026-2:2013 |
| Required master specification | V2.0 |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Parameter bits (programmable via AS-i) | function |
| Degree of protection | EN 60529:2000 |
| Emitted interference | EN 61000-6-4:2007 |
| MTTFd | 555 a |
| Rated operating voltage | 18.5 ... 31.6 V from AS-Interface |
| LED IN | switching state (input); 2 LED yellow |
| Degree of protection | IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
| Connection | AS-Interface: AS-Interface flat cable Inputs and matching connector: M8 round connector, 4-pin, A-coded, according to IEC 61076-2-104 |
| Fieldbus standard | EN 62026-2:2013 |
| Tightening torque, cable gland | 0.4 Nm |
| Input | EN 61131-2:2007 |
Comments
No comments yet