Pepperl+Fuchs VBA-2E-KE5-IJL/UJL
AS-Interface analog module
We ship to United States of America!
- Housing with push-in connection technology and mechanically coded terminal blocks
- Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
- Sensors can be supplied either from the AS-Interface or external auxiliary voltage, as preferred
- Function indicator for the bus, external auxiliary voltage, internal sensor supply, and inputs
Item Number:
VBA-2E-KE5-IJL/UJL
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Data bits (function via AS-Interface) | The transfer of the data value is based on AS-Interface Profile 7.3. |
| Relative humidity | 85 % , noncondensing |
| Resolution | 15 Bit |
| Vibration resistance | 0.35 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Altitude | 2000 m above MSL |
| LED PWR | AS-Interface voltage; green LED Green: voltage OK Flashing green: address 0 or peripheral error |
| Fieldbus standard | EN 62026-2:2013 |
| Input resistance | current input: max. 70 andOmega; voltage input: 100 kandOmega; |
| UL File Number | E223772 |
| MTBF | 154 a |
| Surge protection | UAUX, Ue: overvoltage category II, safe isolated power supplies (PELV) |
| Profile | S-7.3.D |
| Number/Type | 2 analog inputs Current: 0 ... 20 mA/4 ... 20 mA voltage: 0 ... 10 V |
| Degree of protection | IP20 |
| Note | Max. length of jumpers = 5 cm |
| Emitted interference | EN 61000-6-4:2007 |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Slave type | Standard slave |
| Supply | From AS-Interface (switch setting INT, default setting) or from auxiliary voltage UAUX (switch setting AUX) |
| Temperature influence | 1 andmicro;A/K or 0,3 mV/K |
| Parameter bits (programmable via AS-i) | function |
| LED INT | Internal input supply active; LED green |
| LED IN | status of input signal; LED yellow off: not active on: signal within measurement range flashing: signal outside of measurement range |
| Mounting | DIN mounting rail |
| IO code | 7 |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Protection class | III |
| Required master specification | V2.1 |
| Current consumption | IAUX 650 mA |
| ID2 code | D |
| ID1 code | F |
| AS-Interface specification | V3.0 |
| Auxiliary voltage (output) | 20 ... 30 V DC PELV |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Temperature influence | 0.0025 %/K of input signal range |
| ID code | 3 |
| Degree of protection | EN 60529:2000 |
| Connection | Removable push-in terminals rated connection capacity: rigid: 0.20 mm2 ... 1.5 mm2 flexible (without wire end ferrule): 0.20 mm2 ... 2.5 mm2 flexible (with wire end ferrule): 0.25 mm2 ... 1.5 mm2 |
| Mass | 110 g |
| Current loading capacity | 100 mA from AS-Interface; overload and short-circuit resistant 600 mA From auxiliary voltage UAUX (AUX switch position) , overload and short-circuit protected |
| LED FAULT | Fault indication: red LED Red: communication error or address is 0 Red flashing: peripheral fault |
| Accuracy | 0.1 % of input signal range at 25 В°C (298 K) |
| Rated operating current | 70 mA (without sensors) / max. 200 mA |
| Climatic conditions | For indoor use only |
| AS-Interface | EN 62026-2:2013 |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Pollution degree | 2 |
| Shock and impact resistance | 15 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks |
Buy Pepperl+Fuchs VBA-2E-KE5-IJL/UJL with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a fast-developing company in the supply of industrial automation devices. We can offer millions of automation parts for any application. Your order can be delivered to any continent. Become our client and get exclusive prices for the entire range of products. A quick response is our main advantage. We are constantly growing to satisfy all your needs in electrical equipment supply.
Comments
No comments yet