Pepperl+Fuchs VBA-2E1A-G10-ZAL/E2L-1M-2V1-W
AS-Interface sensor/actuator module
- Ultra-compact enclosure
- Gold-plated and machined contacts
- One piece housing
- Degree of protection IP68 / IP69K
- Direct connection via cable outlet
Item Number:
VBA-2E1A-G10-ZAL/E2L-1M-2V1-W
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Rated operating voltage | 18.5 ... 31.6 V from AS-Interface |
Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC option 1 input for 4-wire sensor (PNP), DC |
Input | EN 61131-2:2007 |
Slave type | A/B slave |
AS-Interface | EN 62026-2:2013 |
Supply | from external auxiliary voltage UAUX |
Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
ID code | A |
Current loading capacity | 1000 mA overload and short-circuit resistant |
LED OUT | Switching state (output); LED yellow |
Supply | from external auxiliary voltage UAUX |
IO code | 7 |
Parameter bits (programmable via AS-i) | function |
LED IN | switching state (input); 2 LED yellow |
Number/Type | 1 electronic output, PNP, |
ID2 code | E |
Profile | S-7.A.E |
Auxiliary voltage | 20 ... 30 V DC PELV |
ID1 code | 7 |
Tightening torque, cable gland | 0.4 Nm |
Fieldbus standard | EN 62026-2:2013 |
LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
Voltage | (UAUX - 0.5 V) |
Degree of protection | IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
Input current | 9 mA (limited internally) |
MTTFd | 352 a |
Protection class | III |
Connection | AS-Interface/UAUX: AS-Interface flat cable In-/outputs and matching connector: M12 round connector, 4-pin, A-coded, according to IEC 61076-2-101:2012 |
Degree of protection | EN 60529:2000 |
LED AS-i | AS-Interface voltage; LED green |
Emitted interference | EN 61000-6-4:2007 |
AS-Interface specification | V3.0 |
Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Tightening torque, fastening screws | 1.65 Nm |
Mass | 100 g |
Required master specification | V2.1 |
UL File Number | E223772 ""For use in NFPA 79 Applications only"" |
Voltage | 20 ... 30 V |
Data bits (function via AS-Interface) | |
Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
UL approval | cULus Listed, Type 1 enclosure |
Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Current loading capacity | 1000 mA overload and short-circuit resistant |
Switching point | according to DIN EN 61131-2 (Type 2) |
Rated operating current | 40 mA / max. 60 mA |
Signal delay | < 1 ms (input/AS-Interface) |
People also buy
Comments
No comments yet