Pepperl+Fuchs VBA-2E2A-G10-Z/E2J-1M-V15-G
AS-Interface sensor/actuator module
- Ultra-compact enclosure
- Gold-plated and machined contacts
- One piece housing
- Degree of protection IP68 / IP69K
- Direct connection via cable outlet
Item Number:
VBA-2E2A-G10-Z/E2J-1M-V15-G
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Degree of protection | EN 60529:2000 |
| Protection class | III |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload |
| IO code | 7 |
| Input current | 8 mA (limited internally) |
| Supply | from AS-Interface |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Tightening torque, fastening screws | 1.65 Nm |
| Tightening torque, cable gland | 0.4 Nm |
| Supply | from AS-Interface |
| Noise immunity | EN 61000-6-2:2005 , EN 62026-2:2013 |
| Emitted interference | EN 61000-6-4:2011 |
| Data bits (function via AS-Interface) | |
| UL File Number | E223772 ""For use in NFPA 79 Applications only"" |
| Number/Type | 2 inputs for mechanical contacts |
| Rated operating voltage | 18.5 ... 31.6 V from AS-Interface |
| Number/Type | 2 electronic outputs, PNP, overload and short-circuit proof |
| Slave type | A/B slave |
| AS-Interface | EN 62026-2:2013 |
| Profile | S-7.A.7 |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Required master specification | V3.0 |
| ID1 code | 7 |
| Voltage | Ue |
| Signal delay | < 1 ms (input/AS-Interface) |
| Rated operating current | 40 mA (without inputs/outputs) / max. 200 mA |
| Parameter bits (programmable via AS-i) | function |
| Fieldbus standard | EN 62026-2:2013 |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| MTBF | 379 a |
| Degree of protection | housing: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* M12 socket: IP67/IP68/IP69K |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) |
| ID code | A |
| Voltage | (Ue - 9.0 V) |
| AS-Interface specification | V3.0 |
| Current loading capacity | 150 mA Total current , overload and short-circuit protected |
| Connection | AS-Interface: AS-Interface flat cable In-/outputs and matching connector: M12 connector, 5-pin, A-coded, acc. to IEC 61076-2-101:2012 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| ID2 code | 7 |
| Mass | 84 g |
| UL approval | cULus Listed, Type 1 enclosure |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Comments
No comments yet