Pepperl+Fuchs VBA-2E2A-G4-ZE/E2
AS-Interface sensor/actuator module
- Degree of protection IP67
- A/B slave with extended addressing possibility for up to 62 slaves
- Flat or round cable connection (via standardized EEMS base, not included with delivery)
- Cable piercing method for flat cable
- Communication monitoring
- Inputs for 2- and 3-wire sensors
- Power supply of outputs from the external auxiliary voltage
- Supply for inputs from AS-Interface
- Function display for bus, inputs and outputs
- LED indicator for overload on sensor supply
- Detection of output overload
Item Number:
VBA-2E2A-G4-ZE/E2
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Current | 1 A per output |
| Input current | 8 mA (limited internally) |
| Degree of protection | EN 60529:2000 |
| UL File Number | E223772 |
| Climatic conditions | For indoor use only |
| IO code | B |
| Voltage | 21 ... 31 V |
| Supply | from external auxiliary voltage UAUX |
| Mass | 180 g |
| Pollution degree | 3 |
| Altitude | 2000 m above MSL |
| LED PWR/FAULT | dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply or outputs |
| AS-Interface | EN 62026-2:2013 |
| Tightening torque, housing screws | 0.8 Nm |
| ID code | A |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Connection | cable piercing method or terminal compartment yellow flat cable/black flat cable or standard round cable inputs/outputs:M12 x 1.5 cable glands and cage tension spring terminals |
| Required master specification | V2.1 |
| Degree of protection | IP67 |
| Input | EN 61131-2:2007 |
| Protection class | III |
| Current loading capacity | 100 mA (TB 40 В°C), 75 mA (TB 60 В°C), overload-proof and short-circuit protected |
| ID2 code | 0 |
| Emitted interference | EN 61000-6-4:2001 |
| Auxiliary voltage (output) | 24 V DC В± 15 % PELV |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Relative humidity | 85 % , noncondensing |
| Profile | S-B.A.0 |
| Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC |
| Voltage | (UAUX - 0.5 V) |
| Ambient temperature | -25 ... 60 В°C (-13 ... 140 В°F) |
| Rated operating current | 30 mA (without sensors) / max. 140 mA |
| Noise immunity | EN 61000-6-2:2001 |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
| Data bits (function via AS-Interface) | |
| AS-Interface specification | V2.1 |
| LED OUT | Switching state (output); 2 LED yellow |
| Number/Type | 2 electronic outputs, PNP overload and short-circuit proof |
| LED IN | switching state (input); 2 LED yellow |
| Mounting | DIN rail or screw mounting |
| Parameter bits (programmable via AS-i) | function |
| Slave type | A/B slave |
| ID1 code | 7 |
| Supply | from AS-Interface |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
Comments
No comments yet