Pepperl+Fuchs VBA-4E-G12-ZAL
AS-Interface sensor module
- A/B slave with extended addressing possibility for up to 62 slaves
- One-piece housing with stainless steel base
- Installation without tools
- Metal threaded inserts with SPEEDCON technology
- Flat cable connection with cable piercing technique, variable flat cable guide
- Inputs for 2-, 3-, and 4-wire sensors
- Communication monitoring
- DIN rail mounting
- AS-Interface certificate
Item Number:
VBA-4E-G12-ZAL
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| Emitted interference | EN 61000-6-4:2007 |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| UL File Number | E223772 |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| ID code | A |
| LED IN | switching state (input); 4 LED yellow |
| Signal delay | < 1 ms (input/AS-Interface) |
| Tightening torque, cable gland | 0.4 Nm |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| Auxiliary voltage | 24 V DC В± 15 % PELV |
| AS-Interface | EN 62026-2:2013 |
| Parameter bits (programmable via AS-i) | function |
| ID1 code | 7 |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| AS-Interface specification | V3.0 |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| MTTFd | 330 a |
| Altitude | 2000 m above MSL |
| Required master specification | V2.1 |
| Connection | cable piercing method flat cable yellow inputs: M12 round connector |
| Input | EN 61131-2 |
| Climatic conditions | For indoor use only |
| Protection class | III |
| Degree of protection | IP67 |
| Data bits (function via AS-Interface) | |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Degree of protection | EN 60529:2000 |
| Diagnostic Coverage (DC) | 0 % |
| Fieldbus standard | EN 62026-2:2013 |
| Rated operating current | 40 mA |
| Mounting | Mounting plate |
| Current loading capacity | 600 mA overload and short-circuit resistant |
| Supply | from external auxiliary voltage UAUX |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral |
| IO code | 0 |
| Pollution degree | 3 |
| Mass | 200 g |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Slave type | A/B slave |
| Mission Time (TM) | 20 a |
| ID2 code | 2 |
| Profile | S-0.A.2 |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply |
| Input current | 8 mA (limited internally) |
| Relative humidity | 85 % , noncondensing |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
Comments
No comments yet