Pepperl+Fuchs VBA-4E-G2-ZA
AS-Interface sensor module
- AS-Interface certificate
- Degree of protection IP67
- A/B slave with extended addressing possibility for up to 62 slaves
- Addressing jack
- Flat cable connection with cable piercing technique, variable flat cable guide
- Communication monitoring
- Inputs for 2-, 3-, and 4-wire sensors
- Supply for inputs from AS-Interface
- Ground connection (FE) possible
- Function display for bus and inputs
- Detection of overload on sensor supply
Item Number:
VBA-4E-G2-ZA
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| UL File Number | E223772 |
| Rated operating current | 40 mA (without sensors) / max. 240 mA |
| Voltage | 21 ... 31 V |
| Tightening torque, cable gland | 0.4 Nm |
| ID1 code | 7 |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) |
| Mass | 100 g |
| Current loading capacity | 200 mA (TB 40 В°C), 150 mA (TB 60 В°C), overload-proof and short-circuit protected |
| Parameter bits (programmable via AS-i) | function |
| AS-Interface specification | V2.1 |
| Protection class | III |
| Supply | from AS-Interface |
| Input current | 8 mA (limited internally) |
| Altitude | 2000 m above MSL |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply |
| Required master specification | V2.0 |
| ID2 code | 2 |
| Climatic conditions | For indoor use only |
| Degree of protection | IP67 |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Connection | cable piercing method flat cable yellow inputs: M12 round connector |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Data bits (function via AS-Interface) | |
| Slave type | A/B slave |
| Degree of protection | EN 60529:2000 |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| AS-Interface | EN 62026-2:2013 |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| Profile | S-0.A.2 |
| ID code | A |
| Input | EN 61131-2:2007 |
| Mounting | Mounting plate |
| LED IN | switching state (input); 4 LED yellow |
| IO code | 0 |
| Pollution degree | 3 |
| LED PWR | AS-Interface voltage; LED green |
| Ambient temperature | -25 ... 60 В°C (-13 ... 140 В°F) |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Relative humidity | 85 % , noncondensing |
Comments
No comments yet