Pepperl+Fuchs VBA-4E-KE5-ZEJQ
AS-Interface sensor/actuator module

Pepperl+Fuchs VBA-4E-KE5-ZEJQ
  • Housing with push-in connection technology and mechanically coded terminal blocks
  • Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
  • Selectable supply to the sensors: External or from the module
  • Function display for bus, internal sensor supply, and inputs
Item Number: VBA-4E-KE5-ZEJQ
115.21
-
+
Total price: 115.21
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Degree of protectionIP20
For safety applications: Installation in an enclosure with a minimum protection class of IP54 required
Pollution degree2
Emitted interferenceEN 61000-6-4:2007
Protection classIII
Number/Type4 inputs for 3-wire sensors (PNP), DC
LED INTInternal input supply active; LED green
Degree of protectionEN 60529:2000
Data bits (function via AS-Interface) input output
UL File NumberE223772
Current loading capacity 150 mA, overload- and short-circuit protected (INT)
Relative humidity85 % , noncondensing
Climatic conditionsFor indoor use only
ID2 code0
Noise immunityEN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
Fieldbus standardEN 62026-2:2013
Supplyfrom AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT)
MTBF368 a
ID1 code7
Signal delay< 1 ms (input/AS-Interface)
Parameter bits (programmable via AS-i)function
AS-InterfaceEN 62026-2:2013
Vibration resistance0.35 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
LED PWRAS-Interface voltage; green LED
green: voltage OK
flashing green: address 0
Auxiliary voltage (input)12 ... 30 V DC PELV
Input current 5.6 mA (max.)
LED FAULTFault display; Red LED
red: Communication fault or address is 0
red, flashing: Overload, internal input supply
LED INswitching state (input); 4 LED yellow
Voltage21 ... 31 V DC (INT)
Rated operating voltage26.5 ... 31.6 V from AS-Interface
ConnectionRemovable push-in terminals
rated connection capacity:
rigid: 0.20 mm2 ... 1.5 mm2
flexible (without wire end ferrule): 0.20 mm2 ... 2.5 mm2
flexible (with wire end ferrule): 0.25 mm2 ... 1.5 mm2
AS-Interface specificationV3.0
Surge protectionUEXT, Ue: Over voltage category III, safe isolated power supplies (PELV)
ID codeA
Shock and impact resistance15 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Mass110 g
ProfileS-0.A.0
Rated operating current 35 mA (without sensors) / max. 190 mA
Required master specification V3.0
Switching pointaccording to DIN EN 61131-2 (type 1)
MountingDIN mounting rail
IO code0
Slave typeA/B slave
Altitude 2000 m above MSL
InputEN 61131-2:2004

Comments

No comments yet

Write a comment