Pepperl+Fuchs VBA-4E3A-G4-ZE/E2
AS-Interface sensor/actuator module
We ship to United States of America!
- Degree of protection IP65
- A/B slave with extended addressing possibility for up to 62 slaves
- Flat or round cable connection (via standardized EEMS base, not included with delivery)
- Cable piercing method for flat cable
- Inputs for 2- and 3-wire sensors
- Power supply of outputs from the external auxiliary voltage
- Power supply of inputs from the module
- Function display for bus, ext. auxiliary voltage, inputs and outputs
- LED indicator for overload on sensor supply
Item Number:
VBA-4E3A-G4-ZE/E2
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Number/Type | 3 electronic outputs, PNP, overload and short-circuit proof |
| LED OUT | Switching state (output); 3 LED yellow |
| Rated operating current | 40 mA (without sensors) / max. 240 mA |
| LED PWR/FAULT | dual LED green/red green: AS-Interface voltage red: communication error or address 0 green/red flashing: overload sensor supply or outputs |
| Degree of protection | EN 60529:2000 |
| UL File Number | E223772 |
| Connection | cable piercing method or terminal compartment yellow flat cable/black flat cable or standard round cable inputs/outputs:M12 x 1.5 cable glands and cage tension spring terminals |
| ID1 code | 7 |
| Current | 4 A total OUT 1, OUT 2: 2 A per output OUT 3: 1.5 A |
| Ambient temperature | -25 ... 60 ?°C (-13 ... 140 ?°F) |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
| Supply | from external auxiliary voltage UAUX |
| ID code | A |
| AS-Interface | EN 62026-2:2013 |
| Mounting | DIN rail or screw mounting |
| Parameter bits (programmable via AS-i) | function |
| Required master specification | V2.1 |
| ID2 code | 0 |
| Degree of protection | IP65 |
| LED IN | switching state (input); 4 LED yellow |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
| Fieldbus standard | EN 62026-2:2013 |
| Auxiliary voltage (output) | 24 V DC ?± 15 % PELV |
| Current loading capacity | 180 mA (TB 40 ?°C), 140 mA (TB 60 ?°C), short-circuit protected |
| Input current | 9 mA (limited internally) |
| Supply | from AS-Interface |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Emitted interference | EN 61000-6-4:2007 |
| Slave type | A/B slave |
| Data bits (function via AS-Interface) | |
| Noise immunity | EN 61000-6-2:2005 |
| Pollution degree | 3 |
| AS-Interface specification | V3.0 |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Climatic conditions | For indoor use only |
| Mass | 350 g |
| Profile | S-7.A.0 |
| Voltage | 21 ... 31 V |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Voltage | (UAUX - 0.5 V) |
| Tightening torque, housing screws | 0.8 Nm |
| Input | EN 61131-2:2007 |
| Altitude | 2000 m above MSL |
| Relative humidity | 85 % , noncondensing |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Protection class | III |
| IO code | 7 |
Buy Pepperl+Fuchs VBA-4E3A-G4-ZE/E2 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a world-known industrial automation supplier. We have a lot of products in stock. We deliver to any country in the world. We will give you a valuable offer. We always reply to queries and give feedback. We understand your needs and constantly strive to work more efficiently to solve them.
Comments
No comments yet