Pepperl+Fuchs VBA-4E4A-G12-XEL
AS-Interface sensor/actuator module

Pepperl+Fuchs VBA-4E4A-G12-XEL
  • One-piece housing with stainless steel base
  • Installation without tools
  • Metal threaded inserts with SPEEDCON technology
  • Flat cable connection with cable piercing technique, variable flat cable guide
  • Communication monitoring, configurable
  • Inputs for 2- and 3-wire sensors
  • DIN rail mounting
  • Sensor supply powered by AUX
  • Input and output connection on each M12 connector
Item Number: VBA-4E4A-G12-XEL
199.72
-
+
Total price: 199.72
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
UL File NumberE223772
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Emitted interferenceEN 61000-6-4:2007
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
MountingMounting plate
ID2 code7
Tightening torque, cable gland0.4 Nm
Fieldbus standardEN 62026-2:2013
ID codeA
Degree of protectionIP67
ConnectionCable piercing method
flat cable yellow/flat cable black
inputs/outputs: M12 round connector
Pollution degree3
LED FAULTerror display; LED red
red: communication error or address is 0
red flashing: overload of sensor power supply or outputs
Voltage (UAUX - 0.5 V)
Noise immunityEN 61000-6-2:2005 EN 62026-2:2013
LED PWRAS-Interface voltage; green LED
green: voltage OK
flashing green: address 0
Current1 A per output
Rated operating current 40 mA
Number/Type4 inputs for 2- or 3-wire sensors (PNP), DC
Supplyfrom external auxiliary voltage UAUX
Signal delay< 1 ms (input/AS-Interface)
Relative humidity85 % , noncondensing
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Current loading capacity 500 mA overload and short-circuit resistant
Mass200 g
IO code7
Switching pointaccording to DIN EN 61131-2 (Type 2)
Vibration resistance0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles
Supplyfrom external auxiliary voltage UAUX
Degree of protectionEN 60529:2000
AS-Interface specificationV3.0
InputEN 61131-2:2007
Slave typeA/B slave
Auxiliary voltage24 V DC В± 15 % PELV
Parameter bits (programmable via AS-i)function
Data bits (function via AS-Interface) input output
Shock and impact resistance30 g, 11 ms in 6 spatial directions 3 shocks
10 g, 16 ms in 6 spatial directions 1000 shocks
LED AUXext. auxiliary voltage UAUX; dual LED green/red
green: voltage OK
red: reverse voltage
LED INswitching state (input); 4 LED yellow
AS-InterfaceEN 62026-2:2013
Input current 8 mA (limited internally)
Surge protectionUAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral
Altitude 2000 m above MSL
ProfileS-7.A.7
Protection classIII
Climatic conditionsFor indoor use only
Required master specification V3.0
ID1 code7
Number/Type4 electronic outputs, PNP, overload and short-circuit proof

Comments

No comments yet

Write a comment