Pepperl+Fuchs VBA-4E4A-KE5-ZEJQ/R
AS-Interface sensor/actuator module
We ship to United States of America!
- Housing with push-in connection technology and mechanically coded terminal blocks
- Housing width 19 mm, installation in the switch cabinet on DIN mounting rail
- Selectable supply to the sensors: External or from the module
- Function display for bus, internal sensor supply, inputs, and outputs
Item Number:
VBA-4E4A-KE5-ZEJQ/R
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Current loading capacity | 150 mA, overload- and short-circuit protected (INT) |
| Control circuit | 11 mA per relay (from AS-Interface) |
| Ambient temperature | -25 ... 60 ?°C (-13 ... 140 ?°F) |
| Output/AS-Interface | safe isolation, Rated insulation voltage 252 Veff |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Altitude | 2000 m above MSL |
| Surge protection | O1 ... O4: Over voltage category II UEXT, Ue: overvoltage category II, safe isolated power supplies (PELV) |
| Data bits (function via AS-Interface) | |
| Slave type | A/B slave |
| LED INT | Internal input supply active; LED green |
| IO code | 7 |
| Output/Output | Basic insulation, rated insulation voltage 250 Veff, in phase |
| Number/Type | 4 inputs for 3-wire sensors (PNP), DC |
| ID code | A |
| Usage category | DC-13 and AC-14 |
| Climatic conditions | For indoor use only |
| LED OUT | Switching state (output); 4 LED yellow |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| Supply | none |
| Switching delay | < 10 ms (AS-Interface/contact) |
| Relative humidity | 85 % , noncondensing |
| Electrical safety | IEC 61140:2009 |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| LED FAULT | Fault display; Red LED red: Communication fault or address is 0 red, flashing: Overload, internal input supply |
| Emitted interference | EN 61000-6-4:2007 |
| Shock and impact resistance | 15 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks |
| Pollution degree | 2 |
| Vibration resistance | 0.35 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Auxiliary voltage (input) | 12 ... 30 V DC PELV |
| Number/Type | 4 relay outputs, normally open |
| Degree of protection | IP20 Installation in an enclosure with a minimum protection class of IP54 required |
| Galvanic isolation | EN 60664-1:2007 |
| Input/Output | safe isolation, Rated insulation voltage 252 Veff |
| UL File Number | E223772 |
| Degree of protection | EN 60529:2000 |
| AS-Interface | EN 62026-2:2013 |
| Input current | 5.6 mA (max.) |
| Input/AS-Interface | Switch position INT: None Switch setting EXT: safe isolation, rated insulation voltage 92 Veff |
| Required master specification | V3.0 |
| Mass | 125 g |
| Signal delay | < 1 ms (input/AS-Interface) |
| Voltage | 21 ... 31 V DC (INT) |
| Input | EN 61131-2:2004 |
| ID1 code | 7 |
| MTBF | 224 a |
| LED IN | switching state (input); 4 LED yellow |
| Fieldbus standard | EN 62026-2:2013 |
| Switching point | according to DIN EN 61131-2 (type 1) |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Rated operating current | 35 mA (without sensors) / max. 230 mA |
| Mounting | DIN mounting rail |
| Profile | S-7.A.7 |
| AS-Interface specification | V3.0 |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Connection | Removable push-in terminals rated connection capacity: rigid: 0.20 mm2 ... 1.5 mm2 flexible (without wire end ferrule): 0.20 mm2 ... 2.5 mm2 flexible (with wire end ferrule): 0.25 mm2 ... 1.5 mm2 |
| Parameter bits (programmable via AS-i) | function |
| ID2 code | 7 |
Buy Pepperl+Fuchs VBA-4E4A-KE5-ZEJQ/R with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is your go-to source for industrial electrical parts. Our extensive product range includes various automation equipment, available for fast worldwide delivery. We guarantee high quality and competitive pricing. Make us your trusted partner for all your electrical supply needs.
Comments
No comments yet