Pepperl+Fuchs VBA-4E4E-G11-ZAJ-F
AS-Interface sensor module
- Inputs for 2-, 3-, and 4-wire sensors
- Supply of sensors from AS-Interface
- Function display for bus and inputs
- Degree of protection IP68 / IP69K
- Communication monitoring
- Cable piercing method with gold plated contact pins
- AS-Interface POWER24
Item Number:
VBA-4E4E-G11-ZAJ-F
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Tightening torque, housing screws | 1.8 Nm |
| Relative humidity | 85 % , noncondensing |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| MTTFd | 120 a |
| Current loading capacity | 200 mA, overload and short-circuit protected |
| Signal delay | < 1 ms (input/AS-Interface) |
| UL File Number | E223772 |
| ID1 code | Slave 1 1 |
| AS-Interface | EN 62026-2:2013 |
| Voltage | 12 ... 31 V |
| Degree of protection | IP68 / IP69K |
| Input current | 9 mA (limited internally) |
| Mass | 200 g |
| Diagnostic Coverage (DC) | 0 % |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Mounting | Mounting plate |
| LED IN | switching state (input); 8 LED yellow |
| Data bits (function via AS-Interface) | Input slave 1 |
| LED AS-i/FAULT | 2 Dual LEDs green/red green: AS-Interface voltage red: Communication error yellow/red flashing: Address 0 green/red flashing: Sensor supply overload |
| Climatic conditions | For indoor use only |
| Emitted interference | EN 61000-6-4:2007 |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) |
| Protection class | III |
| Mission Time (TM) | 20 a |
| Degree of protection | EN 60529:2000 |
| ID2 code | 2 |
| Fieldbus standard | EN 62026-2:2013 |
| Parameter bits (programmable via AS-i) | function |
| Tightening torque, cable gland | 0.4 Nm |
| Connection | AS-Interface: AS-Interface flat cable Inputs: M12 round connector |
| Rated operating current | 80 mA (without sensors) / max. 280 mA |
| Pollution degree | 3 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| IO code | 0 |
| Shock and impact resistance | 30 g, 6 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks |
| Required master specification | V2.1 |
| Supply | from AS-Interface |
| Rated operating voltage | 18,0 ... 31.6 V from AS-Interface |
| Altitude | 2000 m above MSL |
| ID code | A |
| AS-Interface specification | V3.0 |
| Profile | S-0.A.2 |
| Number/Type | 2x 4 inputs for 2- or 3-wire sensors (PNP), DC alternative 2x 2 inputs for 4-wire sensors (PNP), DC |
| Slave type | A/B slave |
| Vibration resistance | 0.35 mm 10 ... 57 Hz , 5 g 57 ... 2000 Hz, 10 cycles |
| Input | EN 61131-2:2007 |
Comments
No comments yet