Pepperl+Fuchs VBA-4E4E-G12-ZAJ
AS-Interface sensor module
- A/B slave with extended addressing possibility for up to 62 slaves
- One-piece housing with stainless steel base
- Installation without tools
- Metal threaded inserts with SPEEDCON technology
- Flat cable connection with cable piercing technique, variable flat cable guide
- Communication monitoring, configurable
- Inputs for 2-, 3-, and 4-wire sensors
- DIN rail mounting
- AS-Interface certificate
- Automatic addressing with latest masters in the event of replacement
Item Number:
VBA-4E4E-G12-ZAJ
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| IO code | 0 |
| ID2 code | 2 |
| Mounting | Mounting plate |
| Fieldbus standard | EN 62026-2:2013 |
| Input current | 8 mA (limited internally) |
| Signal delay | < 1 ms (input/AS-Interface) |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| ID1 code | Slave 1 1 |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Connection | cable piercing method flat cable yellow inputs: M12 round connector |
| Altitude | 2000 m above MSL |
| Degree of protection | IP67 |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Mission Time (TM) | 20 a |
| Climatic conditions | For indoor use only |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Tightening torque, cable gland | 0.4 Nm |
| Slave type | Double A/B slave |
| Supply | from AS-Interface |
| Degree of protection | EN 60529:2000 |
| UL File Number | E223772 |
| LED PWR/FAULT | 2 Dual LEDs green/red green: AS-Interface voltage red: Communication error yellow/red flashing: Address 0 green/red flashing: Sensor supply overload |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Mass | 230 g |
| Required master specification | V2.1 |
| Pollution degree | 3 |
| AS-Interface specification | V3.0 |
| Emitted interference | EN 61000-6-4:2007 |
| ID code | A |
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| Relative humidity | 85 % , noncondensing |
| LED IN | switching state (input); 8 LED yellow |
| Diagnostic Coverage (DC) | 0 % |
| Surge protection | Ue: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral |
| Number/Type | 2x 4 inputs for 2- or 3-wire sensors (PNP), DC alternative 2x 2 inputs for 4-wire sensors (PNP), DC |
| Current loading capacity | 200 mA, overload and short-circuit protected |
| Voltage | 21 ... 31 V |
| Input | EN 61131-2 |
| Profile | S-0.A.2 |
| Protection class | III |
| Data bits (function via AS-Interface) | Input slave 1 |
| MTTFd | 60 a |
| Parameter bits (programmable via AS-i) | function |
| Rated operating current | 80 mA (without sensors) / max. 280 mA |
| AS-Interface | EN 62026-2:2013 |
Comments
No comments yet