Pepperl+Fuchs VBG-ENX-K20-D
AS-Interface gateway
- Gateway compliant with AS-Interface specification 3.0
- Connection to Ethernet Modbus TCP/IP
- Dublicate addressing detection
- Integrated webserver
- Earth fault detection
- AS-Interface noise detection
- Ethernet diagnostic interface
- Integrated switch allows line topology
- DLR technology supports ring topology
- Overview +
- Comments +
VBG-ENX-K20-D - This AS-Interface safety monitor is designed with diagnostic capabilities, supporting AS-i Safety at Work applications. It can monitor multiple safety nodes on the AS-Interface network, making it a reliable component for ensuring safe and secure operations within complex automation setups.
Diagnostics functionExtended function via display
| PLC-Functionality | activateable |
| LED U AS-i | AS-Interface voltage; LED green |
| Ethernet | RJ-45 |
| LED PRJ MODE | projecting mode active; LED yellow |
| Interface type | Chip card slot |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| Rated operating current | 300 mA from AS-Interface |
| UL approval | An isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| EMC monitoring | integrated |
| Duplicate address detection | from AS-Interface slaves |
| MTTFd | 105 a at 30 ?°C |
| Button | 4 |
| Protocol | EtherNet/IP + MODBUS TCP/IP acc. to IEEE 802.3 supports device level ring protocol DLR |
| Mass | 500 g |
| Degree of protection | EN 60529:2000 |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
| AS-Interface | spring terminals, removable |
| Insulation voltage | 500 V |
| LED PRG ENABLE | autom. programming; LED green |
| LED CONFIG ERR | configuration error; LED red |
| Construction type | Low profile housing , Stainless steel |
| Interface type | RS 232, serial Diagnostic Interface |
| Degree of protection | IP20 |
| Earth fault detection | integrated |
| Rated operating voltage | from AS-Interface 30 V DC |
| Display | Illuminated graphical LC display for addressing and error messages |
| Transfer rate | 19,2 kBit/s |
| Interface type | 2 x RJ-45 |
| LED ETHERNET | ethernet active; LED green |
| EAC conformity | TR CU 020/2011 |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e) |
| LED POWER | voltage ON; LED green |
| AS-Interface | EN 62026-2:2013 |
| Ambient temperature | 0 ... 55 ?°C (32 ... 131 ?°F) |
| AS-Interface specification | V3.0 |
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 |
Buy Pepperl+Fuchs VBG-ENX-K20-D with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. provides complete industrial automation solutions. With a wide selection of products and efficient delivery options, we meet your needs effectively. Our focus on quality and customer satisfaction distinguishes us. Experience our exceptional service and support for your automation needs.
Comments
No comments yet