Pepperl+Fuchs VBG-ENX-K20-D-EV24
AS-Interface gateway

Pepperl+Fuchs VBG-ENX-K20-D-EV24
  • Connection to Ethernet Modbus TCP/IP
  • Dublicate addressing detection
  • Earth fault detection
  • AS-Interface noise detection
  • Ethernet diagnostic interface
  • Integrated switch allows line topology
  • DLR technology supports ring topology
  • AS-Interface POWER24
Item Number: VBG-ENX-K20-D-EV24
899.62
-
+
Total price: 899.62
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
EthernetRJ-45
LED U AS-iAS-Interface voltage; LED green
Earth fault detectionintegrated
Insulation voltage 500 V
StandardsEN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e)
PLC-Functionalityactivateable
Interface type2 x RJ-45
AS-InterfaceEN 62026-2:2013
Degree of protectionIP20
Transfer rate100 MBit/s
LED CONFIG ERRconfiguration error; LED red
Switch SETSelection and setting of a slave address
LED PRG ENABLEautom. programming; LED green
ProtocolEtherNet/IP + MODBUS TCP/IP acc. to IEEE 802.3
supports device level ring protocol DLR
UL File NumberE223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
OK buttonMode selection traditional-graphical/confirmation
Duplicate address detectionfrom AS-Interface slaves
ESC buttonMode selection traditional-graphical/cancel
LED AS-i ACTIVEAS-Interface operation normal; LED green
Mass500 g
Electromagnetic compatibilityEN 61000-6-2:2005, EN 61000-6-4:2007
EMC monitoringintegrated
Button MODEMode selection PRJ-operation/save configuration/cursor
Diagnostics functionExtended function via display
MTTFd105 a at 30 В°C
Degree of protectionEN 60529:2000
Construction typeLow profile housing , Stainless steel
LED ETHERNETethernet active; LED green
DisplayIlluminated graphical LC display for addressing and error messages
LED PRJ MODEprojecting mode active; LED yellow
Power supplymax. 4 A per AS-Interface circuit
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
AS-Interface specificationV3.0
Rated operating voltage24 V DC ( 20 ... 31.6 V )
safe isolated power supplies (PELV)
Note
24 V power supply, max. segment length: 50 m
Supply via AS-Interface power supply, max. segment length: 100 m
Ambient temperature0 ... 55 В°C (32 ... 131 В°F)
Interface typeChip card slot
LED POWERvoltage ON; LED green
AS-Interfacespring terminals, removable
UL approvalAn isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed.
UL mark does not provide UL certification for any functional safety rating or aspects of the device.
Rated operating currentapprox. 250 mA

Comments

No comments yet

Write a comment