Pepperl+Fuchs VBG-ENX-K30-DMD-S16
AS-Interface Gateway/Safety Monitor
- Gateway and safety monitor in one housing
- Gateway compliant with AS-Interface specification 3.0
- Connection to Ethernet Modbus TCP/IP
- AS-Interface safety monitor with extended range of functions
- Certified up to SIL 3 according to IEC 61508 and EN 62061 and up to PLe according to EN 13849
- Memory card for configuration data
- 2 AS-Interface networks
- 2 safe output relays and 2 safe electronic outputs
- Integrated switch allows line topology
- DLR technology supports ring topology
Item Number:
VBG-ENX-K30-DMD-S16
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Performance level (PL) | PL e |
| EMC monitoring | integrated |
| LED PRG ENABLE | autom. programming; LED green |
| Mass | 800 g |
| Rated operating current | 300 mA off AS interface network 1 300 mA off AS interface network 2 370 mA in total |
| LED POWER | voltage ON; LED green |
| Protocol | EtherNet/IP + MODBUS TCP/IP acc. to IEEE 802.3 supports device level ring protocol DLR |
| Display | Illuminated graphical LC display for addressing and error messages |
| LED ETHERNET | ethernet active; LED green |
| Degree of protection | IP20 |
| Transfer rate | 19,2 kBit/s |
| Duplicate address detection | from AS-Interface slaves |
| AS-Interface | EN 62026-2:2013 |
| Interface type | RS 232, serial Diagnostic Interface |
| LED CONFIG ERR | configuration error; LED red |
| AS-Interface specification | V3.0 |
| B10d | 2 E+7 |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e) |
| Degree of protection | EN 60529:2000 |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Interface type | Chip card slot |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
| Response delay | < 40 ms |
| Insulation voltage | 500 V |
| Earth fault detection | integrated |
| Number/Type | 4 EDM/Start inputs: EDM: Inputs for the external device monitoring circuits Start: start inputs: Static switching current 4 mA at 24 V, dynamic 30 mA at 24 V (T=100 andmu;s) |
| Construction type | Low profile housing , Stainless steel |
| Interface type | 2 x RJ-45 |
| Ethernet | RJ-45 |
| Ambient temperature | 0 ... 55 В°C (32 ... 131 В°F) |
| Switch-on delay | < 10 s |
| AS-Interface | spring terminals, removable |
| UL approval | An isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| PLC-Functionality | activateable |
| LED U AS-i | AS-Interface voltage; LED green |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| Rated operating voltage | 26.5 ... 31.6 V from AS-Interface; Output K3 and K4 24 V DC |
| Button | 4 |
| Diagnostics function | Extended function via display |
| LED output circuit | Output circuit closed; 4 x green LEDs |
| MTTFd | 200 a |
| Safety output | max. contact load: Output circuits 1 and 2: 2 potential-free contacts, 3 ADC-13 at 30 VDC, 3 AAC-15 at 30 VAC Output circuits 3 and 4: 2 PNP transistor outputs 0.5 ADC-13 at 30 VDC |
| LED EDM/Start | External device monitoring circuit inputs closed, 4x yellow LEDs |
| Safety Integrity Level (SIL) | SIL 3 |
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED AUX | ext. auxiliary voltage UAUX ; LED green |
Comments
No comments yet