Pepperl+Fuchs VBG-MOD-K20-D
AS-Interface gateway
- Connection to MODBUS RTU
- Easy commissioning and fault diagnosis via LEDs and graphic display
- Dublicate addressing detection
- Earth fault detection
- AS-Interface noise detection
- RS 232 diagnosis interface
Item Number:
VBG-MOD-K20-D
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Rated operating current | 180 mA from AS-Interface |
| AS-Interface | spring terminals, removable |
| AS-Interface specification | V3.0 |
| Display | Illuminated graphical LC display for addressing and error messages |
| Duplicate address detection | from AS-Interface slaves |
| ESC button | Mode selection traditional-graphical/cancel |
| Earth fault detection | integrated |
| UL File Number | E223772 |
| PLC-Functionality | activateable |
| Switch SET | Selection and setting of a slave address |
| Protocol | MODBUS RTU (Remote Terminal Unit) |
| MODBUS | RS 485 interface |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| Rated operating voltage | from AS-Interface |
| Construction type | Low profile housing , Stainless steel |
| Degree of protection | EN 60529:2000 |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| Insulation voltage | 500 V |
| LED POWER | voltage ON; LED green |
| LED CONFIG ERR | configuration error; LED red |
| Diagnostics function | Extended function via display |
| MTTFd | 90 a at 30 В°C |
| LED U AS-i | AS-Interface voltage; LED green |
| EMC monitoring | integrated |
| Mass | 420 g |
| Storage temperature | -15 ... 75 В°C (5 ... 167 В°F) |
| Degree of protection | IP20 |
| Ambient temperature | 0 ... 55 В°C (32 ... 131 В°F) |
| Interface type | RS-485 |
| Transfer rate | 19,2 kBit/s |
| LED MODBUS | MODBUS interface in operation, LED green |
| LED PRG ENABLE | autom. programming; LED green |
| Interface type | RS 232, serial Diagnostic Interface |
| OK button | Mode selection traditional-graphical/confirmation |
Comments
No comments yet