Pepperl+Fuchs VBG-PN-K20-D-EV24
AS-Interface gateway

Pepperl+Fuchs VBG-PN-K20-D-EV24
  • Connection to PROFINET IO
  • Conformance Class B
  • Easy commissioning by graphic display
  • AS-Interface monitor or extended AS-Interface diagnostic read via display
  • Dublicate addressing detection
  • Earth fault detection
  • AS-Interface noise detection
  • All AS-Interface functions possible via Ethernet
  • Ethernet diagnostic interface
  • AS-Interface POWER24
Item Number: VBG-PN-K20-D-EV24
831.73
-
+
Total price: 831.73
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Construction typeLow profile housing , Stainless steel
ESC buttonMode selection traditional-graphical/cancel
DisplayIlluminated graphical LC display for addressing and error messages
UL File NumberE223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source
StandardsEN 61000-6-2:2005, EN 61000-6-4:2007
LED AS-i ACTIVEAS-Interface operation normal; LED green
LED ETHERNETPROFINET communication active; LED green
No PROFINET communication; LED red
Interface typeChip card slot
Storage temperature-25 ... 85 В°C (-13 ... 185 В°F)
UL approvalAn isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed.
UL mark does not provide UL certification for any functional safety rating or aspects of the device.
AS-Interface specificationV3.0
Transfer rate100 MBit/s
Interface typePROFINET I / O device (IRT)
PROFINETRJ-45
LED POWERvoltage ON; LED green
Duplicate address detectionfrom AS-Interface slaves
Degree of protectionEN 60529:2000
Rated operating currentapprox. 250 mA
AS-InterfaceEN 62026-2:2013
Power supplymax. 4 A per AS-Interface circuit
Physical 2 x RJ-45
Ambient temperature0 ... 55 В°C (32 ... 131 В°F)
OK buttonMode selection traditional-graphical/confirmation
ProtocolMedia Redundancy Protocol (MRP)
Degree of protectionIP20
Rated operating voltage24 V DC ( 20 ... 31.6 V )
safe isolated power supplies (PELV)
Note
24 V power supply, max. segment length: 50 m
Supply via AS-Interface power supply, max. segment length: 100 m
EMC monitoringintegrated
LED PRJ MODEprojecting mode active; LED yellow
LED PRG ENABLEautom. programming; LED green
Electromagnetic compatibilityEN 61000-6-2:2005, EN 61000-6-4:2007
LED CONFIG ERRconfiguration error; LED red
Switch SETSelection and setting of a slave address
MTTFd105 a at 30 В°C
Diagnostics functionExtended function via display
Insulation voltage 500 V
Mass500 g
Earth fault detectionintegrated
AS-Interfaceremovable spring clamp terminals
LED U AS-iAS-Interface voltage; LED green
Button MODEMode selection PRJ-operation/save configuration/cursor

Comments

No comments yet

Write a comment