Pepperl+Fuchs VBM-CTR-K20-R2
AS-Interface master
- Stand alone master with PLC functionality and RS 232 interface
- Large, graphic LCD
- RS 232 diagnosis interface
- Easy commissioning and fault diagnosis via LEDs and graphic display
- Earth fault detection
- AS-Interface noise detection
Item Number:
VBM-CTR-K20-R2
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| AS-Interface specification | V3.0 |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED PRG ENABLE | autom. programming; LED green |
| Ambient temperature | 0 ... 55 В°C (32 ... 131 В°F) |
| Switch SET | Selection and setting of a slave address |
| Diagnostics function | Extended function via display |
| Display | Illuminated graphical LC display for addressing and error messages |
| Insulation voltage | 500 V |
| LED POWER | voltage ON; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| Mass | 460 g |
| Serial interfaces | 9-pin Sub-D socket |
| Electromagnetic compatibility | EN 61326 |
| Transfer rate | 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600 or 11500 Bit/s , Automatic baud rate detection |
| LED U AS-i | AS-Interface voltage; LED green |
| AS-Interface | EN 62026-2:2013 |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| OK button | Mode selection traditional-graphical/confirmation |
| AS-Interface | spring terminals, removable |
| EMC monitoring | integrated |
| PLC-Functionality | integrated |
| LED CONFIG ERR | configuration error; LED red |
| Construction type | Low profile housing , Stainless steel |
| Rated operating voltage | from AS-Interface |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| Degree of protection | EN 60529:2000 |
| ESC button | Mode selection traditional-graphical/cancel |
| Degree of protection | IP20 |
| LED RS 232 | interface in operation; LED green |
| Earth fault detection | integrated |
| Interface type | RS 232 |
| Rated operating current | 150 mA |
| UL approval | An isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| Storage temperature | -15 ... 75 В°C (5 ... 167 В°F) |
| Cable length | max. 30 m |
| MTTFd | 180 a at 30 В°C |
Comments
No comments yet