Pepperl+Fuchs VL18-54-M/40a/118/128
Retroreflective sensor

Pepperl+Fuchs VL18-54-M/40a/118/128
  • Array control panel with highly visible LED display
  • Flashing power on LED in case of short-circuit
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Protection class II
Item Number: VL18-54-M/40a/118/128
138.59
-
+
Total price: 138.59
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Operating voltage10 ... 30 V DC , class 2
Signal outputPush-pull (4 in 1) output short-circuit protected overvoltage protected
Diameter of the light spot200 mm at a distance of 3500 mm
Degree of protectionIP67
Directive conformityEMC Directive 2004/108/EC
Switching voltage30 V DC
Operation indicatorLED green, flashes in case of short-circuit
Mission Time (TM)20 a
Ambient light limit30000 Lux ; according to EN 60947-5-2:2007
Ambient temperature-25 ... 70 В°C (-13 ... 158 В°F)
Diagnostic Coverage (DC)0 %
Angle of divergence3 В°
Switching typelight/dark on, switchable
Response time1 ms
UL approvalcULus Listed, Type 1 enclosure
Optical facefrontal
CCC approvalCCC approval / marking not required for products rated 36 V
Control elementsSensitivity adjuster, light/dark switch
Switching frequency500 Hz
Function indicatorLED yellow, light with free light beam , flashes when falling short of the stability control , OFF when light beam is interrupted
Connection4-pin, M12 x 1 connector
Reference targetH50 reflector
No-load supply current< 25 mA
Relative humidity90 % , noncondensing
Switching currentmax. 200 mA
Mass60 g
Protection classII , rated voltage 50 V AC with pollution degree 1-2 according to IEC 60664-1
Light typemodulated visible red light , 632 nm
Threshold detection range4 m
Voltage drop 2.5 V DC
Effective detection range0 ... 3.5 m
Polarization filteryes
Storage temperature-30 ... 70 В°C (-22 ... 158 В°F)
Light sourceLED
Hysteresis< 15 %
MTTFd700 a

Comments

No comments yet

Write a comment