Pepperl+Fuchs VL18-54-M-LAS/32/40a/82b/118
Retroreflective sensor

Pepperl+Fuchs VL18-54-M-LAS/32/40a/82b/118
  • M18 threaded housing made of brass, nickel plated
  • Visible red light, pulsed LASER light
  • Array control panel with highly visible LED display
  • Flashing power on LED in case of short-circuit
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Protection class II
Item Number: VL18-54-M-LAS/32/40a/82b/118
249.17
-
+
Total price: 249.17
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Mass60 g
Pre-fault indication output1 PNP, inactive when falling short of the stability control
Diameter of the light spot150 mm x 100 mm at a distance of 12 m
Operation indicatorLED green, flashes in case of short-circuit
Function indicatorLED yellow, light with free light beam , flashes when falling short of the stability control , OFF when light beam is interrupted
Threshold detection range20 m
Ambient temperature-25 ... 55 В°C (-13 ... 131 В°F)
Reflector distance0.06 ... 18 m
Light sourcelaser diode
Polarization filteryes
CCC approvalCCC approval / marking not required for products rated 36 V
Directive conformityEMC Directive 2004/108/EC
Switching typelight/dark on, switchable
Protection classII , rated voltage 50 V AC with pollution degree 1-2 according to IEC 60664-1
Degree of protectionIP67
Light typemodulated visible red light
No-load supply current< 20 mA
Operating voltage10 ... 30 V DC , class 2
Ambient light limit30000 Lux
Storage temperature-30 ... 70 В°C (-22 ... 158 В°F)
Switching frequency500 Hz
UL approvalcULus Listed, Type 1 enclosure
Mission Time (TM)20 a
Hysteresis< 15 %
Angle of divergence1 В°
Switching currentmax. 200 mA
Effective detection range0 ... 18 m
Response time1 ms
Optical facefrontal
Switching voltage30 V DC
MTTFd700 a
Connection4-pin, M12 x 1 connector
Diagnostic Coverage (DC)0 %
Control elementsSensitivity adjuster, light/dark switch
Voltage drop 2.5 V DC
Reference targetH85 reflector
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector

Comments

No comments yet

Write a comment