Pepperl+Fuchs VS18/VSE18-M-LAS/32/40a/76a/82b/118
Thru-beam sensor
- M18 threaded housing made of brass, nickel plated
- Detection of very small parts in the near range
- Visible red light, pulsed LASER light
- Focusable optical system
- Array control panel with highly visible LED display
- Flashing power on LED in case of short-circuit
Item Number:
VS18/VSE18-M-LAS/32/40a/76a/82b/118
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Operation indicator | LED green, flashes in case of short-circuit |
| Light type | modulated visible red light |
| Protection class | II , rated voltage 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
| Effective detection range | 0 ... 60 m |
| Receiver | VSE18-M-LAS/32/40a/82b/118 |
| Response time | 100 micro/s |
| Diagnostic Coverage (DC) | 90 % |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching type | light/dark on, switchable |
| Function indicator | LED yellow, light with free light beam , flashes when falling short of the stability control , OFF when light beam is interrupted (in receiver) |
| No-load supply current | Emitter: 20 mA , Receiver: 15 mA |
| UL approval | cULus Listed, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Control elements | Sensitivity adjuster, light/dark switch (receiver) |
| Shock resistance | b < 30 g, T < 11 ms |
| Switching current | max. 200 mA |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Storage temperature | -30 ... 70 В°C (-22 ... 158 В°F) |
| Degree of protection | IP67 |
| Test input | emitter deactivation at +UB |
| Angle of divergence | adjustable focal point |
| Voltage drop | 2.5 V DC |
| Diameter of the light spot | 100 mm x 100 mm at a distance of 85 m |
| Mass | 60 g (device) |
| Ambient temperature | -25 ... 55 В°C (-13 ... 131 В°F) |
| Emitter | VS18-M-LAS/76a/118 |
| Directive conformity | EMC Directive 2004/108/EC |
| Mission Time (TM) | 20 a |
| MTTFd | 520 a |
| Switching frequency | 5000 Hz |
| Optical face | frontal |
| Switching voltage | 30 V DC |
| Pre-fault indication output | 1 PNP, inactive when falling short of the stability control , max. 100 mA |
| Ambient light limit | 30000 Lux |
| Light source | laser diode |
| Hysteresis | < 15 % |
| Threshold detection range | 85 m |
| Connection | 4-pin, M12 x 1 connector |
Comments
No comments yet