Pepperl+Fuchs VT18-8-400-M-LAS/32/40a/118
Diffuse mode sensor

Pepperl+Fuchs VT18-8-400-M-LAS/32/40a/118
  • M18 threaded housing made of brass, nickel plated
  • Visible red light, pulsed LASER light
  • Array control panel with highly visible LED display
  • Flashing power on LED in case of short-circuit
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Protection class II
Item Number: VT18-8-400-M-LAS/32/40a/118
253.68
-
+
Total price: 253.68
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Light sourcelaser diode
Switching typelight/dark on, switchable
Connection4-pin, M12 x 1 connector
Mission Time (TM)20 a
No-load supply current< 25 mA
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Function indicatorLED yellow, lights up with receiver lit
Diagnostic Coverage (DC)0 %
Storage temperature-30 ... 70 В°C (-22 ... 158 В°F)
Hysteresis< 15 %
Control elementsSensing range adjuster, light-on/dark-on changeover switch
Detection range0 ... 400 mm , adjustable
Switching frequency500 Hz
MTTFd700 a
Detection range min.0 ... 25 mm
Protection classII , rated voltage 50 V AC with pollution degree 1-2 according to IEC 60664-1
CE conformityyes
Ambient light limit30000 Lux
CCC approvalCCC approval / marking not required for products rated 36 V
Diameter of the light spotapprox. 0.5 mm at a distance of 120 mm
Mass60 g
Directive conformityEMC Directive 2004/108/EC
Response time1 ms
Operating voltage10 ... 30 V DC , class 2
Optical facefrontal
Switching voltage30 V DC
Degree of protectionIP67
Operation indicatorLED green, flashes in case of short-circuit
Light typemodulated visible red light
Ambient temperature-25 ... 55 В°C (-13 ... 131 В°F)
Switching currentmax. 200 mA
UL approvalcULus Listed, Type 1 enclosure
Detection range max.0 ... 400 mm

Comments

No comments yet

Write a comment