Pepperl+Fuchs WCS-IP110
WCS interface module
- Integrated display
- Connection of up to 4 read heads LS211 or LS111
- DIN rail mounting
- Integrated bus termination
- Binary code
Item Number:
WCS-IP110
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Connection of | control system |
Output stage | Push-pull (4 in 1) output |
Rated operating current | 15 mA |
Control input | store input 2 inputs for reading head address |
Transfer rate | max. 500 Updates/s |
Housing height | 74 mm |
Transmission method | half duplex |
Storage temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Connection type | removable terminal block |
Degree of protection | IP20 |
Installation | DIN rail mounting |
Emitted interference | EN 55011 |
Power consumption | 2 W (without read heads) |
Connectable read heads | WCS-LS211 , WCS-LS111 |
Mass | approx. 400 g |
Refresh cycle of read head | 1 ms |
Relative humidity | 80 % |
Housing width | 100 mm |
Transfer rate | max. 187.5 kBit/s |
Noise immunity | DIN EN 50082-2 |
Connection of | Read head |
Signal output | error condition |
Installation position | any position |
Interface type | RS-485 |
Output type | PNP |
Operating temperature | 0 ... 55 В°C (32 ... 131 В°F) |
Data output format | binary code |
Material | plastic |
RS485 termination resistor | integrated |
Operating voltage | 24 V DC В± 20 % |
Interface type | Push-pull, parallel |
Load current | max. 5 mA |
People also buy
Comments
No comments yet